Effect of Rotational Shear and Heat Input on the Microstructure and Mechanical Properties of Large-Diameter 6061 Aluminium Alloy Additive Friction Stir Deposition

被引:2
|
作者
Zhu, Xiaohu [1 ]
Wang, Rui [1 ]
Wang, Lin [1 ]
Liu, Mengmeng [1 ]
Li, Songmo [1 ]
机构
[1] Harbin Inst Technol, Sch Ocean Engn, 2 Wenhuaxi Rd, Weihai 264200, Peoples R China
关键词
additive friction stir deposition; 6061 aluminium alloy; continuous dynamic recrystallisation; microstructure; mechanical properties; RESEARCH PROGRESS; RECRYSTALLIZATION; BEHAVIOR; TEXTURE;
D O I
10.3390/cryst14070581
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
Additive friction stir deposition (AFSD), in which molten metal materials are formed into free-form stacked structural parts according to the path design, may have a wide range of applications in high-efficiency mass production. In this study, experiments were conducted for the rotational speed in the AFSD parameters of 6061 aluminium alloy bars to investigate the effects of different rotational shear conditions and heat inputs on the properties of the deposited layer for diameter bars based on the analysis of the micro-morphology, micro-tissue composition, and mechanical properties. The width and thickness of each layer were constant, approximately 40 mm wide and 2.5 mm thick. The particle undulations on the surface of the deposited layer were positively correlated with the AFSD rotational speed. Continuous dynamic recrystallisation in the AFSD process can achieve more than 90% grain refinement. When the rotational speed increases, it causes localised significant orientation and secondary deformation within the recrystallised grains. The ultimate tensile strength of the deposited layer was positively correlated with the rotational speed, reaching a maximum of 211 MPa, and the elongation was negatively correlated with the rotational speed, with a maximum material elongation of 37%. The cross-section hardness of the deposited layer was negatively correlated with the number of thermal cycles, with the lowest hardness being about 45% of the base material and the highest hardness being about 80% of the base material.
引用
收藏
页数:20
相关论文
共 50 条
  • [1] Effect of heat input on microstructure and mechanical properties of AA6061 alloys fabricated by additive friction stir deposition
    Qiao, Q.
    Tang, C. . I.
    Lam, W. I.
    Pu, J.
    Shi, H.
    Qian, H.
    Li, Z.
    Guo, D.
    Zhang, D.
    Kwok, C. T.
    Tam, L. M.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 6182 - 6195
  • [2] Effect of rotational speed and feed rate on microstructure and mechanical properties of 6061 aluminum alloy manufactured by additive friction stir deposition
    Chen, Gang
    Wu, Kai
    Wang, Yu
    Zhu, Zhixiong
    Nie, Pan
    Hu, Fengfeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (3-4): : 1165 - 1176
  • [3] Effect of rotational speed and feed rate on microstructure and mechanical properties of 6061 aluminum alloy manufactured by additive friction stir deposition
    Gang Chen
    Kai Wu
    Yu Wang
    Zhixiong Zhu
    Pan Nie
    Fengfeng Hu
    The International Journal of Advanced Manufacturing Technology, 2023, 127 : 1165 - 1176
  • [4] The effect of heat treatment on the microstructure and mechanical properties of multilayer AA6061 alloy fabricated by additive friction stir deposition
    Chen, Lan
    Li, Yunze
    Lu, Linkai
    Yang, Zhiwei
    Ren, Xudong
    Zhang, Xinzhou
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [5] Microstructure Evolution and Mechanical Properties of Multilayer AA6061 Alloy Fabricated by Additive Friction Stir Deposition
    Lan Chen
    Linkai Lu
    Lei Zhu
    Zhiwei Yang
    Wangfan Zhou
    Xudong Ren
    Xinzhou Zhang
    Metallurgical and Materials Transactions A, 2024, 55 : 1049 - 1064
  • [6] Microstructure Evolution and Mechanical Properties of Multilayer AA6061 Alloy Fabricated by Additive Friction Stir Deposition
    Chen, Lan
    Lu, Linkai
    Zhu, Lei
    Yang, Zhiwei
    Zhou, Wangfan
    Ren, Xudong
    Zhang, Xinzhou
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (04): : 1049 - 1064
  • [7] Effects on microstructure and mechanical properties of aluminum alloy 6061 processed via underwater additive friction stir deposition
    Kinser, R. P.
    Zhu, N.
    Williams, M. B.
    Rushing, T. W.
    Doherty, K. J.
    Allison, P. G.
    Jordon, J. B.
    JOURNAL OF MANUFACTURING PROCESSES, 2025, 134 : 932 - 942
  • [8] Sheet-based friction stir additive manufactured 6061 aluminium alloy: Microstructure, texture evolution and mechanical properties
    Han, Yuqiang
    Lv, Keke
    Lin, Chunfa
    Dai, Yuxuan
    Li, Xiang
    Wang, Enhao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 915
  • [9] Microstructure and mechanical properties of Al–Li alloy manufactured by additive friction stir deposition
    Li Y.
    Zhang M.
    Wang H.
    Lai R.
    Yang B.
    Li Y.
    Materials Science and Engineering: A, 2023, 887
  • [10] Microstructure Evolution of Al6061 Alloy Made by Additive Friction Stir Deposition
    Zeng, Congyuan
    Ghadimi, Hamed
    Ding, Huan
    Nemati, Saber
    Garbie, Abdelrahman
    Raush, Jonathan
    Guo, Shengmin
    MATERIALS, 2022, 15 (10)