Insight into low-grade natural Linze palygorskite for composite particles preparation towards efficient wastewater treatment

Natural clay possesses advantages such as low cost and high adsorption capacity, rendering it a promising adsorbent for wastewater treatment. In this work, low-grade Linze palygorskite (LZ), comprising 20.5% palygorskite, was utilized as a representative material to synthesize polyvinylformal-LZ (PVFM-LZ) composite particles through cross-linking polyvinyl alcohol (PVA) with formaldehyde. The raw material ratio of LZ and PVA was maintained at a high level of 20:1. Meanwhile, high-purity montmorillonite (Mt) and palygorskite (Pal) were employed as raw materials to prepare PVFM-Mt and PVFM-Pal using the same method, enabling comparative analysis with PVFM-LZ. PVFM-LZ exhibited a notable adsorption capacity of 101.92 mg center dot g- 1 for methylene blue, which was comparable to that of PVFM-Mt and PVFM-Pal. What's more, owing to the tightly cross-linked network structure formed by PVFM, PVFM-LZ demonstrated minimal loss (2.53%) and swelling (8.0%) rates in water, facilitating easy separation and promoting recyclability. Even after six cycles, its adsorption efficiency remained above 85%. The structure, physicochemical properties and adsorption performance of the three composite particles were meticulously examined before and after adsorption. Kinetic, thermodynamic and isotherm adsorption models revealed that PVFM-LZ exhibited spontaneous surface-controlled monolayer adsorption behavior. The possible adsorption mechanisms included electrostatic interactions, hydrogen bonding, and intermolecular forces. This work may provide an experience for the adsorption application of low-grade natural clay in composite engineering.