NUMERICAL STABILITY ANALYSIS OF OIL COLLECTOR CASE SELF-EXCITED VIBRATIONS

被引:0
|
作者
Shuvaev, Nikolay V. [1 ]
Voronova, Natalia O.
Vinogradov, Kirill A.
机构
[1] PJSC UEC Saturn, Perm Engn Ctr, Perm, Russia
来源
PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 10A, PT I | 2020年
关键词
aeroelasticity; labyrinth seal; self-exited vibrations; flutter; traveling wave; ANSYS CFX;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The investigation subject is an Oil Collector Case which is a thin axisymmetric stator part with console binding to the turbine rear frame. It had been suffering from high level vibrations and needed fixing measures to apply. Self-excited vibrations supposed as the main reason for defects to occur. The problem was examined in the engine and test rig conditions. The energetic method which is usually applied to blade flutter problems was used for aeroelastic stability analysis. Radial surface displacements were set according to the harmonic oscillation function that corresponds to the oil collector's first bending eigenmode with two nodal diameters. 3D aerodynamic model represents a 180 degrees sector, thus ensures that surface displacements and gas parameters on periodic surfaces are equal. A set of simulations was carried out and calculated; the aerodynamic damping coefficient values showed aeroelastic instability predisposition in both the engine and test rig conditions for most test cases. Influence of such model parameters as seal radial clearance, pressure ratio, inlet air temperature, wave propagation direction and rotor speed was investigated. A detailed analysis showed that for instability case positive aerodynamic work region lies inside the oil collector cavern downstream labyrinth seal where pressure wave and surface displacement speed wave are close to synchrony. Probable excitation mechanisms were described and discussed. It was demonstrated that aeroelastic instability of the same type as it was in the engine conditions can be reproduced in the test rig conditions.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] EXISTENCE AND STABILITY OF SELF-EXCITED VIBRATIONS WITH IMPACTS
    PETERKA, F
    MECHANISM AND MACHINE THEORY, 1978, 13 (01) : 75 - 83
  • [2] STABILITY OF BARS WITH RESPECT TO SELF-EXCITED FRICTIONAL VIBRATIONS
    OTTL, D
    INGENIEUR ARCHIV, 1976, 45 (5-6): : 393 - 401
  • [3] Displacements analysis of self-excited vibrations in turning
    Claudiu F. Bisu
    Philippe Darnis
    Alain Gérard
    Jean-Yves K’nevez
    The International Journal of Advanced Manufacturing Technology, 2009, 44 : 1 - 16
  • [4] Displacements analysis of self-excited vibrations in turning
    Bisu, Claudiu F.
    Darnis, Philippe
    Gerard, Alain
    K'nevez, Jean-Yves
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (1-2): : 1 - 16
  • [5] Quenching of self-excited vibrations
    Ferdinand Verhulst
    Journal of Engineering Mathematics, 2005, 53 : 349 - 358
  • [6] QUENCHING OF SELF-EXCITED VIBRATIONS
    ASFAR, KR
    JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME, 1989, 111 (02): : 130 - 133
  • [7] SELF-EXCITED VIBRATIONS IN OIL FILM JOURNAL-BEARINGS
    JAIN, PC
    SRINIVASAN, V
    WEAR, 1975, 31 (02) : 219 - 225
  • [8] SELF-EXCITED VIBRATIONS OF THE TIRE
    GORAJ, ZJ
    VEHICLE SYSTEM DYNAMICS, 1982, 11 (5-6) : 345 - 362
  • [9] ABSORPTION OF SELF-EXCITED VIBRATIONS
    HAGEDORN, P
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, 1978, 29 (05): : 815 - 821
  • [10] FRICTIONAL SELF-EXCITED VIBRATIONS
    BESSARAB, NF
    SOVIET PHYSICS-TECHNICAL PHYSICS, 1956, 1 (01): : 95 - 101