A NUMERICAL MODEL FOR ANALYZING CROSS LAMINATED TIMBER UNDER OUT OF PLANE LOADING

被引：0

作者：

Purcar, Martina Vojnic ^{[1
]}

Kozaric, Ljiljana ^{[1
]}

Bursac, Smilja ^{[1
]}

Tekic, Zikica ^{[2
]}

机构：

[1] Univ Novi Sad, Fac Civil Engn Subotica, Kozaracka 2A, Subotica 24000, Serbia

[2] Univ Belgrade, Fac Architecture, Bulevar kralja Aleksandra 73, Belgrade 11000, Serbia

来源：

WOOD RESEARCH | 2024年 / 69卷 / 02期

关键词：

Timber engineering; finite element analysis; cross laminated timber; out of plane bending; CLT PANELS; SHEAR; STIFFNESS; MEMBERS;

D O I：

10.37763/wr.1336-4561/69.2.348357

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

This paper targets the validity of a novel numerical model for analyzing CLT under out of plane loading. This numerical model was initially developed for determining the shear lag effect that appears in laminated thin walled composite beams. A parametric study was conducted in order to determine the influence of orientation of layers in CLT panels on bending strength and deflection. For confirming the accuracy of the proposed model, the results from the numerical model are compared with the external results of the computer software Ansys. The differences in bending stress vary from 0.27% to 1.69% depending on the orientation of layers and for deflection the differences are ranged from 2.25% to 7.42%. A numerical study was conducted and obtained data corresponds to results obtained from experimental study. It was concluded that the proposed numerical method can enough precisely predict the behavior of CLT under out of plane loading.

引用

页码：348 / 357

页数：10

共 50 条

[31] Behaviour of Cross-Laminated Timber Panels under Cyclic Loads
Gavric, Igor
Fragiacomo, Massimo
Popovski, Marjan
Ceccotti, Ario
MATERIALS AND JOINTS IN TIMBER STRUCTURES: RECENT DEVELOPMENTS OF TECHNOLOGY, 2014, 9 : 689 - 702
[32] In-plane compressive behavior of cross-laminated bamboo and timber with variable heights
Li, Hao
Wei, Yang
Ding, Minmin
Chen, Si
Chen, Jiawei
THIN-WALLED STRUCTURES, 2024, 204
[33] Effect of moisture and rate of loading in the withdrawal capacity of screws in Cross Laminated Timber (CLT)
Toumpanaki, Eleni
Gawne, Amelia
Humphreys, Rowan
Vojnovic, Luka
STRUCTURES, 2024, 69
[34] Fire Resistance Test and Numerical Simulation of Cross-Laminated Timber Wall
Zhang J.
Liu D.
Zhang Q.
Bai Y.
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2021, 49 (04): : 9 - 19
[35] Predicting out-of-plane bending strength of cross laminated timber: Finite element simulation and experimental validation of homogeneous and inhomogeneous CLT
Olsson, Anders
Abdeljaber, Osama
ENGINEERING STRUCTURES, 2024, 308
[36] Numerical Analysis of Cross-Laminated Timber (CLT) Buildings: A Parametric Study on Steel Connectors When Subjected to Seismic Loading Under Eurocode 8 and NBR 15421
Victoria, Lucas C.
Aquino, Caroline D.
Branco, Jorge M.
Miguel, Leticia Fleck Fadel
BUILDINGS, 2025, 15 (05)
[37] Cross Laminated Timber under Concentrated Compression Loads-Methods of Reinforcement
Maurer, Bernhard
Maderebner, Roland
ENGINEERING STRUCTURES, 2021, 245
[38] Cross-laminated Timber Plates Subjected to Concentrated Loading Experimental Identification of Failure Mechanisms
Hochreiner, G.
Fuessl, J.
Eberhardsteiner, J.
STRAIN, 2014, 50 (01): : 68 - 81
[39] Numerical Investigation of the Fire Resistance of Protected Cross-Laminated Timber Floor Panels
Menis, Agnese
Fragiacomo, Massimo
Clemente, Isaia
STRUCTURAL ENGINEERING INTERNATIONAL, 2012, 22 (04) : 523 - 532
[40] Experimental and numerical analysis on fire behaviour of loaded cross-laminated timber panels
Wang, Yuexiang
Zhang, Jin
Mei, Fang
Liao, Jianan
Li, Weibin
ADVANCES IN STRUCTURAL ENGINEERING, 2020, 23 (01) : 22 - 36

← 1 2 3 4 5 →