Axial and bending behavior of GFRP bar-reinforced hollow-core polypropylene fiber concrete columns

被引：2

作者：

Ahmad, Habil ^{[1
,2
]}

Sheikh, M. Neaz ^{[1
]}

Hadi, Muhammad N. S. ^{[1
]}

机构：

[1] Univ Wollongong, Sch Civil Min Environm & Architectural Engn, Wollongong, NSW, Australia

[2] Univ Wah, Wah Engn Coll, Rawalpindi, Punjab, Pakistan

来源：

STRUCTURAL CONCRETE | 2024年

关键词：

columns; GFRP bars; GFRP spirals; hollow-core (HC); polypropylene fibers; reinforced concrete; MECHANICAL-PROPERTIES; GLASS; PERFORMANCE;

D O I：

10.1002/suco.202200921

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This study reported the axial (concentric and eccentric) and bending (four-point bending) loadings behavior of glass fiber-reinforced polymer (GFRP) bar-reinforced hollow-core polypropylene fiber concrete (HC-GFRP-PFC) columns. The confinement effect of HC-GFRP-PFC columns with different center-to-center (c/c) spacing of GFRP spirals was also investigated. Twelve hollow-core circular specimens with an outer diameter of 214 mm and an inner (circular hole) diameter of 56 mm were experimentally investigated. Four reference specimens were cast with nonfibrous (normal) concrete, whereas the remaining eight specimens were cast with polypropylene fiber (0.15% by volume of concrete) concrete. It was found that, with a similar ratio of reinforcement, the HC-GFRP-PFC specimens gained 2%-4% higher maximum load (P-Maximum) and 9%-19% higher ductility (mu) than the GFRP bar-reinforced hollow-core nonfibrous concrete (HC-GFRP-NFC) specimens under concentric axial loading and four-point bending. The HC-GFRP-PFC specimens with a 30 mm c/c spacing of the GFRP spiral gained 6%-36% higher P-Maximum and 4%-59% higher mu than the HC-GFRP-PFC specimens with a 60 mm c/c spacing of the GFRP spirals under different loading conditions.

引用

页码：658 / 677

页数：20

共 39 条

[11] AS (Australian Standard), 2014, Compressive strength testsconcrete, mortar and grout specimens
[12] ASTM D695, 2015, Standard test method for compressive properties of rigid plastics
[13] ASTM D7205/7205M, 2016, Standard test method for tensile properties of fiber reinforced polymer matrix composite bars
[14] Bar Mateen., 2021, Pultroon Composites Ltd
[15] Circular Concrete Columns and Beams Reinforced with GFRP Bars and Spirals under Axial, Eccentric, and Flexural Loading
Elchalakani, Mohamed
Dong, Minhao
Karrech, Ali
Ali, Mohamed Sadakkathulla Mohamed
Huo, Jing-Si
[J]. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2020, 24 (03)
[16] Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement
Etcheverry, Mariana
Barbosa, Silvia E.
[J]. MATERIALS, 2012, 5 (06) : 1084 - 1113
[17] Behaviour of Ambient Cured Steel Fibre Reinforced Geopolymer Concrete Columns Under Axial and Flexural Loads
Farhan, Nabeel A.
Sheikh, M. Neaz
Hadi, Muhammad N. S.
[J]. STRUCTURES, 2018, 15 : 184 - 195
[18] An innovative FRP fibre for concrete reinforcement: Production of fibre, micromechanics, and durability
Farooq, Mohammed
Banthia, Nemkumar
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2018, 172 : 406 - 421
[19] Effect of Using GFRP Reinforcement on the Behavior of Hollow-Core Circular Concrete Columns
Hadi, Muhammad N. S.
Ahmad, Habil
Sheikh, M. Neaz
[J]. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2021, 25 (01)
[20] Experimental Investigation of Circular High-Strength Concrete Columns Reinforced with Glass Fiber-Reinforced Polymer Bars and Helices under Different Loading Conditions
Hadi, Muhammad N. S.
Hasan, Hayder Alaa
Sheikh, M. Neaz
[J]. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2017, 21 (04)

← 1 2 3 4 →