The influence of soil fabric on the monotonic and cyclic shear behaviour of consolidated and compacted specimens

被引:6
作者
Silva, Isabella Novais [1 ]
Indraratna, Buddhima [1 ]
Nguyen, Thanh T. [1 ]
Rujikiatkamjorn, Cholachat [1 ]
机构
[1] Univ Technol Sydney, Transport Res Ctr, Sch Civil & Environm Engn, Ultimo, Australia
基金
澳大利亚研究理事会;
关键词
soil fabric; micro-CT scanning; shear behaviour; railway subgrade; cyclic loading; MICROSTRUCTURAL CHANGES; MECHANICAL-BEHAVIOR; BALLASTED RAILWAY; CLAY; SAND; SEGMENTATION; LIQUEFACTION; EMBANKMENT; EVOLUTION; STRENGTH;
D O I
10.1139/cgj-2023-0141
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
While the fabric of soil can significantly influence its behaviour, the effect of varying fabric parameters on the subgrade shear response is still not well understood. This study creates soil specimens with different fabrics which are then captured through X-ray microscopic -computed tomography scanning and quantified by image processing techniques. A comprehensive laboratory investigation is conducted to understand how the soil fabric affects its monotonic and cyclic shear behaviour. The results indicate that the consolidation method creates a more homogeneous fabric with mainly small -to -medium interconnected pores, whereas the compaction technique creates significantly large and mostly inter -aggregate pores with lower connectivity. In this regard, the consolidated specimens exhibit an elastic -perfectly plastic behaviour, while the compacted specimens show strain -hardening transformation during isotropic monotonic shearing. Under anisotropic conditions, the compacted specimens exhibit a greater strain softening response and excess pore pressure than the consolidated specimens because they have a weaker fabric. Furthermore, the compacted specimens show a smaller threshold strain at a lower critical number of cycles due to the collapse of large pores. These current findings prove the decisive role that soil fabric plays in determining the shear response and failure of subgrade soils.
引用
收藏
页码:1159 / 1176
页数:18
相关论文
共 75 条
[1]  
[Anonymous], 2003, ASTM B925-15: Standard Practices for Production and Preparation of Powder Metallurgy (P / M) Test, V03, P1, DOI [10.1520/D0698-12E01.1, DOI 10.1520/D0698-12E01.1, 10.1520/D0698-12E02, DOI 10.1520/D0698-12E02]
[2]  
[Anonymous], 2017, D431817E1 ASTM
[3]  
[Anonymous], 2000, ASTM: D854, P1, DOI [10.1520/D0854-14, DOI 10.1520/D0854-14]
[4]  
[Anonymous], 2017, Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), DOI DOI 10.1520/D2487-17E01
[5]  
[Anonymous], ASTM C136-19, DOI [10.1520/C0136C0136M-19, DOI 10.1520/C0136C0136M-19]
[6]  
ASTM, 2012, D2435-11: Standard Test Methods for OneDimensional Consolidation Properties of Soils Using Incremental Loading, DOI [10.1520/D2435D2435M-11R20, DOI 10.1520/D2435D2435M-11R20]
[7]   Shear strength and pore-water pressure characteristics of sandy soil mixed with plastic fine [J].
Bayat, M. ;
Bayat, E. ;
Aminpour, H. ;
Salarpour, A. .
ARABIAN JOURNAL OF GEOSCIENCES, 2014, 7 (03) :1049-1057
[8]   Cementation effects in two lacustrine clayey soils [J].
Burghignoli A. ;
Miliziano S. ;
Soccodato F.M. .
Geotechnical and Geological Engineering, 2010, 28 (6) :815-833
[9]   30TH RANKINE LECTURE - ON THE COMPRESSIBILITY AND SHEAR-STRENGTH OF NATURAL CLAYS [J].
BURLAND, JB .
GEOTECHNIQUE, 1990, 40 (03) :329-378
[10]   Microstructural changes of an undisturbed, reconstituted and compacted high plasticity clay subjected to wetting and drying [J].
Burton, Glen J. ;
Pineda, Jubert A. ;
Sheng, Daichao ;
Airey, David .
ENGINEERING GEOLOGY, 2015, 193 :363-373