Effects of test temperature on the ball-on-slab wear behavior of nickel-titanium shape memory alloys fabricated by laser powder bed fusion

被引：5
|
作者：
Huang, Xianghui [1 ]
Kang, Nan [1 ]
Coddet, Pierre [2 ]
El Mansori, Mohamed [1 ,3 ]
机构：
[1] HESAM Univ, Arts & Metiers Inst Technol, MSMP, F-51000 Chalons Sur Marne, France
[2] Mines St Etienne, CMP, F-13514 Gardanne, France
[3] Texas A&M Engn Expt Stn, College Stn, TX 77843 USA
来源：
TRIBOLOGY INTERNATIONAL | 2024年 / 196卷
关键词：
Laser powder bed fusion; NiTi alloys; Wear behavior; Temperature; NITI ALLOY; MARTENSITIC-TRANSFORMATION; THERMOMECHANICAL RESPONSE; TRIBOLOGICAL BEHAVIOR; HEAT-TREATMENT; SLIDING WEAR; TINI; STEEL; MICROSTRUCTURE; DEFORMATION;
D O I：
10.1016/j.triboint.2024.109666
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work investigated the effects of test temperature on the ball -on -slab wear behavior of nickel -titanium (NiTi) alloy fabricated by laser powder bed fusion. The average steady-state coefficients of friction (COFs) at 16 degrees C, 36 degrees C, and 56 degrees C are similar, with an average of 0.61 (standard deviation 0.03), rising to 0.75 at 76 degrees C. The larger COFs at 76 degrees C can be ascribed to the large strain fluctuations around the estimated contact stress and more bulging debris. However, after 60 min of wear, the specific wear rate at 76 degrees C is the smallest (1.36 +/- 0.4 x 10-4 mg/N & sdot;m) due to the largest elastic deformation energy of austenite and more adhesive debris. In addition, the dominant wear mechanisms of adhesive, abrasive, oxidative and delamination were discussed in depth.
引用
收藏
页数：14
相关论文
共 50 条
  • [31] Shape recovery performance of a (V, C)-containing Fe-Mn-Si-Ni-Cr shape memory alloy fabricated by laser powder bed fusion
    Ferretto, I.
    Kim, D.
    Mohri, M.
    Ghafoori, E.
    Lee, W. J.
    Leinenbach, C.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 3969 - 3984
  • [32] Formation mechanism of heterogeneous microstructures and shape memory effect in NiTi shape memory alloy fabricated via laser powder bed fusion
    Lu, H. Z.
    Liu, L. H.
    Luo, X.
    Ma, H. W.
    Cai, W. S.
    Lupoi, R.
    Yin, S.
    Yang, C.
    MATERIALS & DESIGN, 2023, 232
  • [33] Enhancing shape memory properties of 3D-printed NiTi alloys by laser powder bed fusion through microstructural control
    Hou, Meili
    Gu, Qingfei
    Yang, Zhiwei
    Zhang, Yanhong
    Liu, Xin
    Zhang, Yifan
    Yang, Jingchao
    Lin, Xin
    Li, Heng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [34] Behavior of the nickel-titanium alloys with the shape memory effect under conditions of shock wave loading
    S. V. Razorenov
    G. V. Garkushin
    G. I. Kanel’
    O. A. Kashin
    I. V. Ratochka
    Physics of the Solid State, 2011, 53 : 824 - 829
  • [35] Behavior of the Nickel-Titanium Alloys with the Shape Memory Effect under Conditions of Shock Wave Loading
    Razorenov, S. V.
    Garkushin, G. V.
    Kanel', G. I.
    Kashin, O. A.
    Ratochka, I. V.
    PHYSICS OF THE SOLID STATE, 2011, 53 (04) : 824 - 829
  • [36] Effect of Post-treatments on the Thermomechanical Behavior of NiTiHf High-Temperature Shape Memory Alloy Fabricated with Laser Powder Bed Fusion
    Timothée Cullaz
    Mohammadreza Nematollahi
    Keyvan Safaei
    Luc Saint-Sulpice
    Laurent Pino
    Saeedeh Vanaei
    Parastoo Jamshidi
    Moataz Attallah
    Othmane Benafan
    Shabnam Arbab Chirani
    Mohammad Elahinia
    Shape Memory and Superelasticity, 2024, 10 : 45 - 54
  • [37] High-temperature fracture behavior of an α /(3 Titanium alloy manufactured using laser powder bed fusion
    Xie, Meishen
    Huang, Sheng
    Wang, Zhi
    Ramamurty, Upadrasta
    ACTA MATERIALIA, 2024, 277
  • [38] The role of texture and restoration mechanisms in defining the tension-compression asymmetry behavior of aged NiTi alloys fabricated by laser powder bed fusion
    Safdel, A.
    Zaker, N.
    Botton, G. A.
    Elbestawi, M. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 864
  • [39] Effect of process parameters on the mechanical behavior of Ti6Al4V alloys fabricated by laser powder bed fusion method
    Baskin, Niyazi
    Yuce, Celalettin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 7006 - 7019
  • [40] Influence of Nb addition and process parameters on the microstructure and phase transformation behavior of NiTiNb ternary shape memory alloys fabricated by laser powder bed fusion
    Xi, Rui
    Jiang, Hao
    Kustov, Sergey
    Zhang, Zhihui
    Zhao, Guoqun
    Vanmeensel, Kim
    Van Humbeeck, Jan
    Wang, Xiebin
    SCRIPTA MATERIALIA, 2023, 222
12345