Research on Radial Double Velocity Measurement Method of Laser Tracker

被引:0
作者
Lv, Fei [1 ]
Hu, Chang'an [2 ]
Li, Jiangang [2 ]
Xu, Yue [3 ]
机构
[1] Chengdu Normal Univ, Sch Comp Sci, Chengdu 611130, Peoples R China
[2] Natl Inst Measurement & Testing Technol, Chengdu 610021, Peoples R China
[3] Northwestern Polytech Univ, Sch Automat, Xian 710129, Peoples R China
基金
中国国家自然科学基金;
关键词
laser tracker; radial measuring speed; indoor large-length standard device; laser interferometer; pyramid prism; equal sampling frequency; equal measurement interval; repeatability measurement;
D O I
10.3390/pr12040649
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
For the dynamic problem that the low-speed sliding table is unable to meet the radial measuring speed of the laser tracker, this paper takes the sliding table of the indoor large-length standard device as the moving object to double the measuring distance by adding a pyramid prism, thereby doubling the radial speed of the laser tracker. In this paper, the measurement data are analyzed through equal interval measurement experiments, equal sampling frequency experiments and repeatability measurement experiments using a pyramid prism to obtain the following conclusions, respectively: Firstly, the stability of the actual interval of the laser tracker is optimal when the rated speed of the sliding table is 50 mm/s. When the pyramid prism is not used, the minimum standard deviation obtained by the laser tracker at a sampling interval of 5 mm is 0.0158 mm. Secondly, during the equal sampling frequency measurement, the stability of the laser interferometer is better than that of the laser tracker when the pyramid prism is not used. With two instruments at a sampling frequency of 10 Hz, the standard deviations of the local velocity of the laser interferometer are 0.1466 mm/s, 0.0693 mm/s and 0.1106 mm/s, respectively. The standard deviations of the laser tracker are 0.1582 mm/s, 0.1033 mm/s and 0.2008 mm/s, respectively. The same conclusion is obtained at a sampling frequency of 20 Hz. The stability of the laser tracker is better than that of the laser interferometer when the pyramid prism is used. Thirdly, the stability and reliability of the local velocity of the laser tracker are better than that of the laser interferometer. For example, at 10 Hz, the standard deviations of the local velocity of the laser tracker are 0.2745 mm/s and 0.2097 mm/s, respectively, and the repeatability of the local velocity is 0.9140 mm/s. The standard deviations of the local velocity of the interferometer are 0.6141 mm/s and 0.6368 mm/s, respectively, and the repeatability of the local velocity is 1.4886 mm/s. And the local velocity of the two measuring instruments is more reliable and stable at a low frequency (10 Hz). This experimental scheme provides a way to measure the high speed of a laser tracker using a sliding table at low speed.
引用
收藏
页数:20
相关论文
共 20 条
  • [1] Investigating dynamic measurement applications through modelling and simulation
    Esward, Trevor J.
    [J]. TM-TECHNISCHES MESSEN, 2016, 83 (10) : 557 - 564
  • [2] Dynamic frequency scanning interferometry measurement based on optical frequency synchronous motion measurement and error compensation
    Gan, Yu
    Duan, Changhao
    Liu, Guodong
    Liu, Bingguo
    Chen, Fengdong
    [J]. OPTICS COMMUNICATIONS, 2021, 488
  • [3] Two-dimensional tool tip vibration measurement method with mirror optical fiber bundles in milling machines
    Jia, Binghui
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2022, 36 (05) : 2189 - 2200
  • [4] Techniques for measuring and compensating for servo mismatch in machine tools using a laser tracker
    Lee, Hoon-Hee
    Son, Jin-Gwan
    Yang, Seung-Han
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8) : 2919 - 2928
  • [5] Development and implementation of a dynamic force measurement system for automatic tool changer system and drawbar mechanism in machining center
    Li, Guofa
    Huo, Yongchao
    He, Jialong
    Wang, Yanbo
    Wei, Jingfeng
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 124 (11-12) : 3875 - 3885
  • [6] Dynamic positioning error analysis and modeling of CNC machine tool guideway system
    Li, Li
    Yang, Hongtao
    Zhang, Yu
    Ma, Qun
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (05) : 1955 - 1967
  • [7] RFID Dynamic Performance Measurement System Embedded in Multiscale Deep Learning
    Li, Lin
    Yu, Xiaolei
    Liu, Zhenlu
    Zhao, Zhimin
    Zhang, Ke
    Zhou, Shanhao
    [J]. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2021, 70
  • [8] An accurate 6-DOF dynamic measurement system with laser tracker for large-scale metrology
    Lin, Jiarui
    Xin, Ruikai
    Shi, Shendong
    Huang, Zhe
    Zhu, Jigui
    [J]. MEASUREMENT, 2022, 204
  • [9] Study on Dynamic Performance Parameters of Laser Tracker Based on Self-Developed Circular Trajectory Generator System
    Lv, Fei
    Hu, Changan
    Sun, Haifeng
    Li, Wanze
    [J]. APPLIED SCIENCES-BASEL, 2023, 13 (01):
  • [10] Ma Y., 2021, Geomat. Spat. Inf. Technol, V44, P23