The mechanical properties of Kevlar three-dimensional angle-interlock fabrics and composites

被引：0
作者：
Shi, Juanjuan [1 ]
Chen, Hongxia [1 ]
Xu, Ninghao [1 ]
Huang, Xiaomei [1 ]
Cao, Haijian [1 ]
机构：
[1] Nantong Univ, Sch Text & Clothing, Nantong, Jiangsu, Peoples R China
来源：
JOURNAL OF THE TEXTILE INSTITUTE | 2024年
基金：
国家重点研发计划;
关键词：
Three-dimensional angle-interlock (3DAI); warp degradation rate; warp crimp percentage; bending property; low-velocity impact property; PLAIN WOVEN; 3D; BEHAVIOR; DAMAGE; 2D; PERFORMANCE;
D O I：
10.1080/00405000.2024.2366704
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
In this article, in order to investigate the difference of mechanical properties between three-dimensional angle-interlock (3DAI) structure and two-dimensional (2D) structure. Kevlar filaments were used as raw material to prepare 3DAI fabrics. The tensile properties of Kevlar 3DAI fabrics were investigated and the influence of warp damage and crimp wave height on the tensile properties was analyzed too. The bending properties and low-velocity impact properties of the 3DAI Kevlar/EP composites and the 2D composites were compared. The results revealed that the warp degradation and crimp percentage in 3DAI fabrics increase with the increase of weft density. The maximum warp degradation rate is 15% and the maximum crimp percentage is 5.4%, which has a negative effect on the mechanical properties of the 3DAI fabrics and the developed Kevlar/EP composites. Compared with the 2D plain composites, the 3DAI composites have superior impact resistance and anti-stratification performance. Moreover, which also has a superior ability to withstand multiple impacts.
引用
收藏
页数：13
相关论文
共 37 条
  • [1] Yarn degradation during weaving process and its effect on the mechanical behaviours of 3D warp interlock p-aramid fabric for industrial applications
    Abtew, Mulat Alubel
    Boussu, Francois
    Bruniaux, Pascal
    Loghin, Carmen
    Cristian, Irina
    Chen, Yan
    Wang, Lichuan
    [J]. JOURNAL OF INDUSTRIAL TEXTILES, 2022, 51 (5_SUPPL) : 9047S - 9070S
  • [2] Influences of fabric density on mechanical and moulding behaviours of 3D warp interlock para-aramid fabrics for soft body armour application
    Abtew, Mulat Alubel
    Boussu, Francois
    Bruniaux, Pascal
    Loghin, Carmen
    Cristian, Irina
    Chen, Yan
    Wang, Lichuan
    [J]. COMPOSITE STRUCTURES, 2018, 204 : 402 - 418
  • [3] Comparative study of mechanical properties and damage kinetics of two- and three-dimensional woven composites under high-strain rate dynamic compressive loading
    Arbaoui, Jamal
    Tarfaoui, Mostapha
    Bouery, Charbel
    Alaoui, Aboulghit El Malki
    [J]. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2016, 25 (06) : 878 - 899
  • [4] On the mechanical response of 2D plain woven and 3D angle-interlock fabrics
    Bandaru, Aswani Kumar
    Sachan, Yogesh
    Ahmad, Suhail
    Alagirusamy, R.
    Bhatnagar, Naresh
    [J]. COMPOSITES PART B-ENGINEERING, 2017, 118 : 135 - 148
  • [5] Low velocity impact response of 2D and 3D Kevlar/polypropylene composites
    Bandaru, Aswani Kumar
    Chavan, Vikrant V.
    Ahmad, Suhail
    Alagirusamy, R.
    Bhatnagar, Naresh
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2016, 93 : 136 - 143
  • [6] General definition of 3D warp interlock fabric architecture
    Boussu, Francois
    Cristian, Irina
    Nauman, Saad
    [J]. COMPOSITES PART B-ENGINEERING, 2015, 81 : 171 - 188
  • [7] Mechanical properties of double and triple fibre-reinforced epoxy hybrid composites
    Boztoprak, Yalcin
    [J]. EMERGING MATERIALS RESEARCH, 2020, 9 (03) : 906 - 912
  • [8] Impact behaviour of composites with different fibre architecture
    Chen, F.
    Hodgkinson, J. M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2009, 223 (G7) : 1009 - 1017
  • [9] An overview on fabrication of three-dimensional woven textile preforms for composites
    Chen, Xiaogang
    Taylor, Lindsay Waterton
    Tsai, Li-Ju
    [J]. TEXTILE RESEARCH JOURNAL, 2011, 81 (09) : 932 - 944
  • [10] Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact
    Cuong Ha-Minh
    Imad, Abdellatif
    Boussu, Francois
    Kanit, Toufik
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2016, 88 : 91 - 101
1234