Simulation of a two-phase loop thermosyphon using a new interface-resolved phase change model

The remarkable progress made in power electronics has been coupled with the miniaturization of systems, requiring high-performance cooling. A solution that has garnered significant interest involves the use of twophase loops, in which heat transfer is associated with the phase change of the working -fluid. This paper aims at modeling two-phase flow with separated phases in a gravity -driven two-phase loop. The Volume -of -Fluid method is employed to capture the moving interface. Amid the variety of the phase change models available in the literature, we have chosen to employ a hybrid model: a subgrid-scale model to generate phase change at the wall in the absence of an interface, and a interface -resolved model for phase change at pre-existing liquidvapor interfaces. These models have been implemented in the OpenFOAM computational code. The developed solver makes possible the simulation of compressible laminar two-phase flow with diabatic liquid -vapor phase change. Conjugate heat transfer between the wall and the fluid is also taken into account. Two-dimensional numerical simulations demonstrate that the developed solver is capable of reproducing flow regimes obtained from experiments, including the formation of Taylor bubbles and the propulsion of liquid from the evaporator to the condenser during geyser boiling. Furthermore, this study examines how the filling ratio affects flow regimes and performance.