Transport parameters for PFOA and PFOS migration through GCL's and composite liners used in landfills

The effect of applied stress (20, 60, and 150 kPa) on the diffusion of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) through a geosynthetic clay liner (GCL) is examined. The diffusion coefficients deduced from GCL diffusion tests for PFOA and PFOS decrease linearly with decreasing final bulk GCL void ratio (increasing applied stresses). The different components of the same GCL are also tested for PFOA and PFOS sorption. No statistically significant sorption of PFOA is observed for any of the components of the GCL. However, some sorption of PFOS onto the cover and carrier geotextiles of the GCL is observed with in an average distribution coefficient, K-d similar to 2.22 ml/g for the GCL. Permeants containing different PFAS compounds are tested to assess their impact on the Geomembrane (GMB) - GCL interface transmissivity in composite liners. Results show PFAS concentrations up to 20 ppm had negligible impact on the GMB-GCL interface transmissivity. Lastly, the GCL specimens extracted from the diffusion tests are tested for hydraulic conductivity. No impact of PFAS is seen on the hydraulic conductivity of GCLs subjected to high applied loads, but a small increase is seen on the GCLs subjected to relatively low applied stresses.