Continuous UV/H2O2 Process: A Sustainable Wastewater Treatment Approach for Enhancing the Biodegradability of Aqueous PVA

Implementing efficient and cost-effective wastewater treatment methods in wastewater treatment plants (WWTPs) is crucial for ensuring sustainable development in contemporary societies. This study explores the feasibility of a continuous UV/H2O2 tubular photoreactor as a pre-treatment to enhance the biodegradability of aqueous polyvinyl alcohol (PVA) solutions, known as a nonbiodegradable wastewater. Using a combination of a Box-Behnken design (BBD) and the response surface methodology (RSM), three main process variables, including the PVA feed concentration, the inlet H2O2 concentration, and the PVA feed flow rate, are studied within ranges of 500-1500 mg/L, 390-780 mg/L, and 50-150 mL/min, respectively. The results show significant interaction effects between the PVA feed and inlet H2O2 concentrations on the effluent BOD5/COD ratio. The optimal operating conditions are determined using the RSM, with a PVA feed concentration of 665 mg/L, an inlet H2O2 concentration of 390 mg/L, and a PVA feed flow rate of 59 mL/min. Operating at this point leads to an increase in the effluent BOD5/COD ratio from 0.15 to 0.53, which is validated experimentally with a +/- 5% error. Under these conditions, the effluent demonstrates an enhanced biodegradability, allowing for redirection to a subsequent biological post-treatment phase. This study demonstrates that using the UV/H2O2 process to enhance the biodegradability of an aqueous PVA solution is more economical than focusing on the complete removal of total organic carbon (TOC). Also, a comparison of these results with those of our previous study indicates that wastewater becomes more biodegradable by progressing the UV/H(2)O(2 )process due to the breakdown of polymer molecules, which reduces their molecular weight and makes them more consumable for biomass.