Interval Type-2 Fuzzy Logic Control of Linear Stages in Feedback-Error-Learning Structure Using Laser Interferometer

被引:1
作者
Khanesar, Mojtaba A. [1 ]
Yan, Minrui [1 ]
Karaca, Aslihan [1 ]
Isa, Mohammed [1 ]
Piano, Samanta [1 ]
Branson, David [1 ]
机构
[1] Univ Nottingham, Fac Engn, Nottingham NG7 2RD, England
基金
英国工程与自然科学研究理事会;
关键词
interval type-2 fuzzy systems (IT2FLSs); feedback error learning; laser interferometer; Kalman filter; SLIDING-MODE; ROBOT; CALIBRATION; SYSTEMS; IDENTIFICATION; REDUCTION; TRACKING;
D O I
10.3390/en17143434
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The output processer of interval type-2 fuzzy logic systems (IT2FLSs) is a complex operator which performs type-reduction plus defuzzification (TR+D) tasks. In this paper, a complexity-reduced yet high-performance TR+D for IT2FLSs based on Maclaurin series approximation is utilized within a feedback-error-learning (FEL) control structure for controlling linear move stages. IT2FLSs are widely used for control purposes, as they provide extra degrees of freedom to increase control accuracies. FEL benefits from a classical controller, which is responsible for providing overall system stability, as well as a guideline for the training mechanism for IT2FLSs. The Kalman filter approach is utilized to tune IT2FLS parameters in this FEL structure. The proposed control method is applied to a linear stage in real time. Using an identification process, a model of the real-time linear stage is developed. Simulation results indicate that the proposed FEL approach using the Kalman filter as an estimator is an effective approach that outperforms the gradient descent-based FEL method and the proportional derivative (PD) classical controller. Motivated by the performance of the proposed Kalman filter-based FEL approach, it is used to control a linear move stage in real time. The position feedback of the move stage is provided by a precision laser interferometer capable of performing measurements with an accuracy of less than 1 mu m. Using this measurement system in a feedback loop with the proposed control algorithm, the overall steady state of the system is less than 20 mu m. The results illustrate the high-precision control capability of the proposed controller in real-time.
引用
收藏
页数:17
相关论文
共 53 条
[1]   A fuzzy disturbance observer based control approach for a novel 1-DOF micropositioning mechanism [J].
Al-Jodah, Ammar ;
Shirinzadeh, Bijan ;
Ghafarian, Mohammadali ;
Das, Tilok Kumar ;
Tian, Yanling ;
Zhang, Dawei .
MECHATRONICS, 2020, 65
[2]   Practical Use of Robot Manipulators as Intelligent Manufacturing Systems [J].
Alhama Blanco, Pablo J. ;
Abu-Dakka, Fares J. ;
Abderrahim, Mohamed .
SENSORS, 2018, 18 (09)
[3]   UV-assisted direct ink write printing of fully aromatic Poly(amide imide)s: Elucidating the influence of an acrylic scaffold [J].
Arrington, Clay B. ;
Rau, Daniel A. ;
Williams, Christopher B. ;
Long, Timothy E. .
POLYMER, 2021, 212
[4]   On the Stability of Interval Type-2 TSK Fuzzy Logic Control Systems [J].
Biglarbegian, Mohammad ;
Melek, William W. ;
Mendel, Jerry M. .
IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART B-CYBERNETICS, 2010, 40 (03) :798-818
[5]   Insights into the Mechanical Behaviour of a Layered Flexible Tactile Sensor [J].
Castellanos-Ramos, Julian ;
Navas-Gonzalez, Rafael ;
Fernandez, Ivan ;
Vidal-Verdu, Fernando .
SENSORS, 2015, 15 (10) :25433-25462
[6]   Design of a precise linear-rotary positioning stage for optical focusing based on the stick-slip mechanism [J].
Chang, Qingbing ;
Liu, Yingxiang ;
Deng, Jie ;
Zhang, Shijing ;
Chen, Weishan .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 165
[7]  
Chapman M., 2013, Renishaw Technical White Paper
[8]   One wheel vehicle real world control based on interval type 2 fuzzy controller [J].
Chiu, Chih-Hui ;
Hung, Yao-Ting .
MECHATRONICS, 2020, 70
[9]   Adaptive Model-Free Control With Nonsingular Terminal Sliding-Mode for Application to Robot Manipulators [J].
Choi, Jinsuk ;
Baek, Jaemin ;
Lee, Woongyong ;
Lee, Young Sam ;
Han, Soohee .
IEEE ACCESS, 2020, 8 :169897-169907
[10]   Complete 3-D self-calibration of coordinate measuring machines [J].
Dang, Q. C. ;
Yoo, S. ;
Kim, S. -W. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) :527-530