New Opportunities in Real-Time Diagnostics of Induction Machines

被引:0
作者
Baraskova, Tatjana [1 ]
Kudelina, Karolina [2 ]
Shirokova, Veroonika [1 ]
机构
[1] Tallinn Univ Technol, Virumaa Coll, Mech Engn & Energy Technol Proc Control Work Grp, EE-30322 Kohtla Jarve, Estonia
[2] Tallinn Univ Technol, Dept Elect Power Engn & Mechatron, EE-19086 Tallinn, Estonia
关键词
condition monitoring; electromechanical system; induction motors; remote control; real-time monitoring; DIRECT TORQUE; MOTOR; CONTROLLER; SINGLE;
D O I
10.3390/en17133265
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This manuscript addresses the critical challenges in achieving high-accuracy remote control of electromechanical systems, given their inherent nonlinearities and dynamic complexities. Traditional diagnostics often suffer from data inaccuracies and limitations in analytical techniques. The focus is on enhancing the dynamic model accuracy for remote induction motor control in both closed- and open-loop speed control systems, which is essential for real-time process monitoring. The proposed solution includes real-time measurements of input and output physical quantities to mitigate inaccuracies in traditional diagnostic methods. The manuscript discusses theoretical aspects of nonlinear torque formation in induction drives and introduces a dynamic model employing vector control and speed control schemes alongside standard frequency control methods. These approaches optimize frequency converter settings to enhance system performance under varying nonlinear conditions. Additionally, the manuscript explores methods to analyze dynamic, systematic errors arising from frequency converter inertial properties, thereby improving electromechanical equipment condition diagnostics. By addressing these challenges, the manuscript significantly advances the field, offering a promising future with enhanced dynamic model accuracy, real-time monitoring techniques, and advanced control methods to optimize system reliability and performance.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Real-time dynamic efficiency optimization for induction machines
    Stumper, Jean-Francois
    Kennel, Ralph
    2013 AMERICAN CONTROL CONFERENCE (ACC), 2013, : 6589 - 6594
  • [2] Review of Methods for Real-Time Loss Minimization in Induction Machines
    Bazzi, Ali M.
    Krein, Philip T.
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2010, 46 (06) : 2319 - 2328
  • [3] A Real-Time Platform Dedicated to On-Line Gear Tooth Surface Damage Fault Detection in Induction Machines
    Kia, Shahin Hedayati
    Henao, Humberto
    Capolino, Gerard-Andre
    2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2014, : 1478 - 1484
  • [4] Diagnostics and real-time monitoring of pulsed laser ablation
    Hong, MH
    Lu, YF
    Chong, TC
    SECOND INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2002, 4426 : 51 - 54
  • [5] Real-time application of simulation tools and implementation of control techniques for induction machines in Matlab/Simulink® environment
    Spiller, PA
    Haffner, JF
    Pereira, LFA
    IECON-2002: PROCEEDINGS OF THE 2002 28TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-4, 2002, : 2068 - 2072
  • [6] New capabilities of the incoherent Thomson scattering diagnostics in the TCV tokamak: divertor and real-time measurements
    Arnichand, H.
    Andrebe, Y.
    Blanchard, P.
    Antonioni, S.
    Couturier, S.
    Decker, J.
    Duval, B. P.
    Felici, F.
    Galperti, C.
    Isoz, P-F
    Lavanchy, P.
    Llobet, X.
    Marletaz, B.
    Marmillod, P.
    Masur, J.
    JOURNAL OF INSTRUMENTATION, 2019, 14
  • [7] Real-time monitoring of Machines using Open Platform Communication
    Verma, Nishchal K.
    Sharma, Teena
    Maurya, Seetaram
    Singh, Dhan Jeet
    Salour, Al
    2017 IEEE INTERNATIONAL CONFERENCE ON PROGNOSTICS AND HEALTH MANAGEMENT (ICPHM), 2017, : 124 - 129
  • [8] Novel opportunities for wildlife conservation and research with real-time monitoring
    Wall, Jake
    Wittemyer, George
    Klinkenberg, Brian
    Douglas-Hamilton, Iain
    ECOLOGICAL APPLICATIONS, 2014, 24 (04) : 593 - 601
  • [9] Real-time voltage sag detection and classification for power quality diagnostics
    Nagata, Erick A.
    Ferreira, Danton D.
    Bollen, Math H. J.
    Barbosa, Bruno H. G.
    Ribeiro, Eduardo G.
    Duque, Carlos A.
    Ribeiro, Paulo F.
    MEASUREMENT, 2020, 164
  • [10] IoT Enabled Real-Time Availability and Condition Monitoring of CNC Machines
    Siddhartha, B.
    Chavan, Arunkumar P.
    Hd, Gopala Krishna
    Subramanya, K. N.
    2020 IEEE INTERNATIONAL CONFERENCE ON INTERNET OF THINGS AND INTELLIGENCE SYSTEM (IOTAIS), 2021, : 78 - 84