Synthesis of Zinc Oxide Nanoparticles From Cymodocea Serrulata Leaf Extract and Their Biological Activities

Introduction The utilization of Cymodocea serrulata for the eco-friendly synthesis of zinc oxide nanoparticles, which contain distinguishable nanostructures, presents a cost-effective and environmentally sustainable alternative for producing zinc nanoparticles. The production process of zinc nanoparticles are rich in phytochemicals, which can serve as stabilizing and reducing agents. Zinc nanoparticles can easily pass through bacterial cell walls and reach all cellular components. C. serrulata, is a small submerged angiosperm commonly found in submerged and tidal coastal environments. Aim Analysis of the biological activities of zinc oxide nanoparticles made from C. serrulata leaf extract. Materials and Methods Dry leaves of C. serrulata were ground into a powder, which was then placed into a conical flask and filled with water. Subsequently, the color of the mixture turned black. Next, a 20 mm piece of ZnO was dissolved in a 60 ml sample of distilled water to prepare the metal solution. Following this, a wavelength scan ranging from 200 to 700 nm was conducted using ultraviolet (UV) spectroscopy. After shaking the solution for an hour, a final reading was taken across the UV spectrum. The synthetic sample should also be centrifuged to remove any pellets and subsequently dried in a hot air oven. Result Using nanoscale profiling, the average particle size was measured and found to be less than 100 nm, specifically UV spectrum analysis revealed a notable absorbance value of 47.0 nm, at different angles within the peak height. The wavelength range of the zinc nanoparticles was observed to be between 250 and 350 nm. Conclusion The antibacterial properties of ZnO NPs have been demonstrated through in vitro investigations, indicating their potential application in in vivo studies.