EFFECT OF PHASE CHANGE MATERIAL ON TEMPERATURE IN A ROOM FITTED WITH A WINDCATCHER

被引：0

作者：

Abdo, Peter ^{[1
]}

Huynh, B. Phuoc ^{[1
]}

Braytee, Ali ^{[1
]}

Taghipour, Rahil ^{[1
]}

机构：

[1] Univ Technol Sydney, Fac Engn & Informat Technol, Sydney, NSW, Australia

来源：

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 7 | 2020年

关键词：

THERMAL-ENERGY STORAGE; CHANGE MATERIAL PCM; BUILDINGS; PERFORMANCE; SYSTEMS; WALL;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Global warming and climate change have been considered as major challenges over the past few decades. Sustainable and renewable energy sources are nowadays needed to overcome the undesirable consequences of rapid development in the world. Phase change materials (PCM) are substances with high latent heat storage capacity which absorb or release the heat from or to the surrounding environment. They change from solid to liquid and vice versa. PCMs could be used as a passive cooling method which enhances energy efficiency in buildings. Integrating PCM with natural ventilation is investigated in this study by exploring the effect of phase change material on the temperature in a room fitted with a windcatcher. A chamber made of acrylic sheets fitted with a windcatcher is used to monitor the temperature variations. The dimensions of the chamber are 1250 x 1000 x 750 mm(3). Phase change material is integrated respectively at the walls of the room, its floor and ceiling and within the windcatchers inlet channel. Temperature is measured at different locations inside the chamber. Wind is blown through the room using a fan with heating elements.

引用

页数：8

共 30 条

[1] Abdo P., 2016, 20 AUSTR FLUID MECH
[2] Abdo P., 2018, 21 AUSTR FLUID MECH
[3] Evaluation of air flow through an active green wall biofilter
Abdo, Peter
Phuoc Huynh, B.
Irga, Peter J.
Torpy, Fraser R.
[J]. URBAN FORESTRY & URBAN GREENING, 2019, 41 : 75 - 84
[4] Abdo P, 2019, PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 7
[5] Abdo P, 2018, ASME FLUID ENG DIV
[6] Abdo P, 2018, ASME FLUID ENG DIV
[7] Abdo P, 2018, ASME FLUID ENG DIV
[8] Abdo P, 2018, PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 7
[9] Abdo P, 2017, PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2017, VOL 1B
[10] LOW-TEMPERATURE LATENT-HEAT THERMAL-ENERGY STORAGE - HEAT-STORAGE MATERIALS
ABHAT, A
[J]. SOLAR ENERGY, 1983, 30 (04) : 313 - 332

← 1 2 3 →