Multi-stage strain-hardening behavior of dual-phase steels: A review

被引:3
作者
Najafi, Y. [1 ]
Mazaheri, Y. [2 ]
Ragheb, Z. Delbari [1 ]
Daiy, H. [1 ]
机构
[1] Iran Univ Sci & Technol, Sch Met & Mat Engn, Tehran 1684613114, Iran
[2] Shiraz Univ, Sch Engn, Dept Mat Sci & Engn, Shiraz 7194684334, Iran
来源
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2024年 / 31卷
关键词
Dual-phase steels; Strain-hardening behavior; Hollomon analysis; Differential Crussard-Jaoul analysis; Modified Crussard-Jaoul analysis; MARTENSITE VOLUME FRACTION; LOW-CARBON STEEL; MECHANICAL-PROPERTIES; HIGH-STRENGTH; TENSILE PROPERTIES; INITIAL MICROSTRUCTURE; DEFORMATION-BEHAVIOR; PLASTIC-DEFORMATION; DISLOCATION DENSITY; FRACTURE-BEHAVIOR;
D O I
10.1016/j.jmrt.2024.07.100
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Regardless of the abundant studies that have been published on various characteristics of dual-phase (DP) steels, a comprehensive review paper on the strain-hardening behavior of such materials is still lacking. Therefore, the present study endeavors to summarize the existing results and findings regarding the strain-hardening phenomena during deformation in DP steels. The focus of this review article is on common methods used to investigate the strain-hardening characteristics of DP steels. Moreover, it encompasses a discussion on the microstructural characteristics and their correlation with strain-hardening behavior within these materials. Furthermore, this review aims to elucidate the limitations, bottlenecks, and scientific challenges to guide researchers to gain a deeper knowledge of the strain-hardening behavior of DP steels.
引用
收藏
页码:3860 / 3882
页数:23
相关论文
共 149 条
  • [1] Strain hardening behavior of a friction stir welded magnesium alloy
    Afrin, N.
    Chen, D. L.
    Cao, X.
    Jahazi, M.
    [J]. SCRIPTA MATERIALIA, 2007, 57 (11) : 1004 - 1007
  • [2] Effect of thermomechanical processing on hardenability and tensile fracture of dual-phase steel
    Ahmad, E.
    Manzoor, T.
    Hussain, N.
    Qazi, N. K.
    [J]. MATERIALS & DESIGN, 2008, 29 (02) : 450 - 457
  • [3] Thermomechanical processing in the intercritical region and tensile properties of dual-phase steel
    Ahmad, E.
    Manzoor, T.
    Hussain, N.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 508 (1-2): : 259 - 265
  • [4] Effect of ferrite volume fraction on work hardening behavior of high bainite dual phase (DP) steels
    Akbarpour, Mohammad Reza
    Ekrami, A.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 477 (1-2): : 306 - 310
  • [5] Effect of martensite volume fraction on mechanical properties of dual-phase treated AISI-4012 sheet steels
    Aksakal, B.
    Karaca, F.
    Arikan, R.
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2010, 101 (05) : 684 - 691
  • [6] Micromechanical modeling of dual phase steels
    Al-Abbasi, FM
    Nemes, JA
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2003, 45 (09) : 1449 - 1465
  • [7] Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite
    Alibeyki, Mohammad
    Mirzadeh, Hamed
    Najafi, Mostafa
    [J]. VACUUM, 2018, 155 : 147 - 152
  • [8] Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels
    Alibeyki, Mohammad
    Mirzadeh, Hamed
    Najafi, Mostafa
    Kalhor, Alireza
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (06) : 2683 - 2688
  • [9] Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels
    Alipour, Mandi
    Torabi, Mohammad Amin
    Sareban, Mohammad
    Lashini, Hadi
    Sadeghi, Ehsan
    Fazaeli, Abolfaz, I
    Habibi, Mostafa
    Hashemi, Ramin
    [J]. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2020, 48 (05) : 525 - 541
  • [10] Mechanical properties of alloys consisting of two ductile phases
    Ankem, S
    Margolin, H
    Greene, CA
    Neuberger, BW
    Oberson, PG
    [J]. PROGRESS IN MATERIALS SCIENCE, 2006, 51 (05) : 632 - 709