Effect of difference in microstructure of rare refractory metal silicate doping matrix on oxidation behavior and mechanism of C/SiC composites

被引:3
|
作者
Li, Wenpeng [1 ]
Yang, Huiyong [1 ]
Huang, Juntong [1 ]
Wang, Lianyi [2 ]
Luo, Ruiying [1 ]
Chen, Zhi [1 ]
Deng, Chengmou [1 ]
Qiu, Jintao [1 ]
Wang, Jihong [1 ]
机构
[1] Nanchang Hangkong Univ, Sch Mat Sci & Engn, Nanchang 330063, Peoples R China
[2] Beihang Univ, Res Inst Frontier Sci, Beijing 100191, Peoples R China
基金
中国国家自然科学基金;
关键词
ZrSiO4; doping; Matrix modification; Oxidation behavior; C/SiC composites; HEAT-TREATMENT; FABRICATION; RESISTANCE;
D O I
10.1016/j.ceramint.2024.05.119
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Doping refractory metal silicates into the matrix of C/SiC composites is an effective means to improve their oxidation resistance. Previous studies have demonstrated that doping HfSiO4 matrix availably enhanced the oxidation resistance of C/SiC composites, but the high raw material cost of HfSiO4 limits its widespread application. This paper attempts to introduce ZrSiO4 matrix, which has lower raw material cost and similar properties to HfSiO4, into C/SiC matrix through the same process. To clarify whether the microstructure of the refractory metal silicate doped matrix significantly impacts the oxidation behavior of C/SiC composites, the preparation temperature of ZrSiO4 was increased to 1100 degrees C. The densification effect, oxidation behavior, and related mechanisms of C/SiC composites doped with ZrSiO4 matrix were investigated and compared in detail with the previously studied C/SiC composites doped with HfSiO4 matrix. Results show that the oxidation resistance behavior of C/SiC composites is relatively sensitive to the microstructure of the refractory metal silicate-doped matrix. At lower preparation temperatures of refractory metal silicates, the particle size of the composite matrix is significantly refined, which is conducive to improving the matrix densification degree of the composites and protecting more carbon fibers from erosion by the oxidizing environment, thus achieving a better oxidation resistance modification effect.
引用
收藏
页码:28196 / 28208
页数:13
相关论文
共 33 条
  • [31] Effect of cooling rate and laser process parameters on additive manufactured Fe-Ti-C metal matrix composites microstructure and carbide morphology
    Emamian, Ali
    Alimardani, Masoud
    Khajepour, Amir
    JOURNAL OF MANUFACTURING PROCESSES, 2014, 16 (04) : 511 - 517
  • [32] Microstructure, wear and corrosion characteristics of multiple-reinforced (SiC-B4C-Al2O3) Al matrix composites produced by liquid metal infiltration
    Ozturk, Kubilay
    Gecu, Ridvan
    Karaaslan, Ahmet
    CERAMICS INTERNATIONAL, 2021, 47 (13) : 18274 - 18285
  • [33] Effect of Sintering Temperatures, Reinforcement Size on Mechanical Properties and Fortification Mechanisms on the Particle Size Distribution of B4C, SiC and ZrO2 in Titanium Metal Matrix Composites
    Gemeda, Birhane Assefa
    Sinha, Devendra Kumar
    Singh, Gyanendra Kumar
    Alghtani, Abdulaziz H.
    Tirth, Vineet
    Algahtani, Ali
    Mengesha, Getinet Asrat
    Ahmed, Gulam Mohammed Sayeed
    Hossain, Nazia
    MATERIALS, 2022, 15 (16)