Effect of difference in microstructure of rare refractory metal silicate doping matrix on oxidation behavior and mechanism of C/SiC composites

被引:3
|
作者
Li, Wenpeng [1 ]
Yang, Huiyong [1 ]
Huang, Juntong [1 ]
Wang, Lianyi [2 ]
Luo, Ruiying [1 ]
Chen, Zhi [1 ]
Deng, Chengmou [1 ]
Qiu, Jintao [1 ]
Wang, Jihong [1 ]
机构
[1] Nanchang Hangkong Univ, Sch Mat Sci & Engn, Nanchang 330063, Peoples R China
[2] Beihang Univ, Res Inst Frontier Sci, Beijing 100191, Peoples R China
基金
中国国家自然科学基金;
关键词
ZrSiO4; doping; Matrix modification; Oxidation behavior; C/SiC composites; HEAT-TREATMENT; FABRICATION; RESISTANCE;
D O I
10.1016/j.ceramint.2024.05.119
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Doping refractory metal silicates into the matrix of C/SiC composites is an effective means to improve their oxidation resistance. Previous studies have demonstrated that doping HfSiO4 matrix availably enhanced the oxidation resistance of C/SiC composites, but the high raw material cost of HfSiO4 limits its widespread application. This paper attempts to introduce ZrSiO4 matrix, which has lower raw material cost and similar properties to HfSiO4, into C/SiC matrix through the same process. To clarify whether the microstructure of the refractory metal silicate doped matrix significantly impacts the oxidation behavior of C/SiC composites, the preparation temperature of ZrSiO4 was increased to 1100 degrees C. The densification effect, oxidation behavior, and related mechanisms of C/SiC composites doped with ZrSiO4 matrix were investigated and compared in detail with the previously studied C/SiC composites doped with HfSiO4 matrix. Results show that the oxidation resistance behavior of C/SiC composites is relatively sensitive to the microstructure of the refractory metal silicate-doped matrix. At lower preparation temperatures of refractory metal silicates, the particle size of the composite matrix is significantly refined, which is conducive to improving the matrix densification degree of the composites and protecting more carbon fibers from erosion by the oxidizing environment, thus achieving a better oxidation resistance modification effect.
引用
收藏
页码:28196 / 28208
页数:13
相关论文
共 33 条
  • [21] Effect of different rare earth fluoride doping on microstructure and ablation properties of C/C-ZrC-SiC composites prepared by molten salt assisted reactive melt infiltration
    Shen, Yuzhu
    Sun, Wei
    Liu, Qinghua
    Xiong, Xiang
    Zhang, Hongbo
    CERAMICS INTERNATIONAL, 2024, 50 (13) : 22209 - 22219
  • [22] Effect of SiC Particle Size on the Mechanical and Wear Behavior of Al356 Metal Matrix Composites
    Karakoc, Halil
    SILICON, 2023, 15 (15) : 6729 - 6744
  • [23] The effect of SiC content in aluminum-based metal matrix composites on the microstructure and mechanical properties of welded joints
    Jayashree, P. K.
    Gowrishankar, M. C.
    Sharma, Sathyashankara
    Shetty, Raviraj
    Hiremath, Pavan
    Shettar, Manjunath
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 12 : 2325 - 2339
  • [24] Effect of Ti3SiC2 on the ablation behavior and mechanism of Cf-C-SiC-Ti3SiC2 composites under oxyacetylene torch at 3000 °C
    Yaghobizadeh, Omid
    Sedghi, Arman
    Baharvandi, Hamid Reza
    CERAMICS INTERNATIONAL, 2019, 45 (01) : 777 - 785
  • [25] Effect of SiC Particle Size on Microstructure, Mechanical Properties, and Oxidation Behavior of HfB2-SiC Composites Prepared by Spark Plasma Sintering
    Sakvand, M.
    Shojaie-Bahaabad, M.
    Nikzad, L.
    RUSSIAN JOURNAL OF INORGANIC CHEMISTRY, 2022, 67 (10) : 1682 - 1693
  • [26] Effect of VC content on the microstructure, ablation and oxidation resistance of the protective oxide layer of C/C-ZrC-VC-SiC composites
    Tian, Tian
    Sun, Wei
    Xiong, Xiang
    Chen, Pengju
    Wen, Qingbo
    Yu, Qiao
    Wang, Ziwei
    CORROSION SCIENCE, 2024, 237
  • [27] Effect of hot extrusion on microstructure and tribological behavior of Mg and Mg/SiC metal matrix composite produced by stir casting route
    Ram, Baljinder
    Drivadi, Dharmpal Deepak
    Bala, Niraj
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
  • [28] On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
    Barmouz, Mohsen
    Givi, Mohammad Kazem Besharati
    Seyfi, Javad
    MATERIALS CHARACTERIZATION, 2011, 62 (01) : 108 - 117
  • [29] Effect of ZrB2 addition on the oxidation behavior of Si-SiC-ZrB2 composites exposed at 1500°C in air
    D'Amico, Claudio
    Bianchi, Giovanni
    Padovano, Elisa
    Biamino, Sara
    Aversa, Alberta
    Badini, Claudio
    Ortona, Alberto
    JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS, 2018, 16 (01): : 14 - 22
  • [30] Effect of Temperature on Oxidation Behavior of 3-Dimensional C/SiC Composites Coated by Different Structural SiC and a-BCx Coatings in Static Wet Oxygen Atmosphere
    Liu, Yongsheng
    Men, Jing
    Zhang, Litong
    Cheng, Laifei
    Yang, Wenbin
    Zhang, Weihua
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2015, 12 (02) : 363 - 370