Effect of duplex surface treatment on the impact properties of maraging steel produced by laser powder bed fusion

被引：3

作者：

Tekin, T. ^{[1
,2
]}

Maines, L. ^{[1
]}

Naclerio, F. ^{[3
]}

Ipek, R. ^{[2
]}

Molinari, A. ^{[1
]}

机构：

[1] Univ Trento, Dept Ind Engn, Via Sommar 9, Trento, Italy

[2] Ege Univ, Dept Mech Engn, Izmir, Turkiye

[3] Pontillo Off Meccan & C, Scafati, SA, Italy

来源：

POWDER METALLURGY | 2024年 / 67卷 / 4-5期

关键词：

laser powder bed fusion; maraging steel; duplex surface treatment; plasma nitriding; impact energy; MECHANICAL-PROPERTIES; HEAT-TREATMENT; MICROSTRUCTURE; PRECIPITATION; BEHAVIOR; EVOLUTION;

D O I：

10.1177/00325899241253271

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The impact properties of an L-PBF 18Ni-300 maraging steel were investigated after different heat and duplex (nitriding and PVD coating) surface treatments. Impact energy is almost isotropic. Contrary to expectations, impact energy is not decreased by surface treatments, since the effect of surface embrittlement of nitriding is compensated by the increase in the austenite content. An important role is played by the geometry of the notch where the surface hardening is lower than in the flat surface of the Charpy specimens.

引用

页码：219 / 227

页数：9

共 33 条

[1]

Avelar-Batista JC., 2003, JORNADAS SAM CONAMET, V600, P06

[2] Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting [J].

Bai, Yuchao ;

Wang, Di ;

Yang, Yongqiang ;

Wang, Hao .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 760 :105-117

[3] Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting [J].

Bai, Yuchao ;

Yang, Yongqiang ;

Wang, Di ;

Zhang, Mingkang .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 703 :116-123

[4]

Bhatia Akash, 2023, Materials Today: Proceedings, P1060, DOI 10.1016/j.matpr.2021.04.379

[5] Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h [J].

Bodziak, Sabrina ;

Al-Rubaie, Kassim S. ;

Dalla Valentina, Luiz ;

Lafratta, Fernando Humel ;

Santos, Edson Costa ;

Zanatta, Andre Marcon ;

Chen, Yimeng .

MATERIALS CHARACTERIZATION, 2019, 151 :73-83

[6]

Cajner F, 2010, MATER TEHNOL, V44, P85

[7] Effect of Combined Tempering and Aging in the Austenite Reversion, Precipitation, and Tensile Properties of an Additively Manufactured Maraging 300 Steel [J].

Conde, Fabio Faria ;

Escobar, Julian David ;

Rodriguez, Johnnatan ;

Afonso, Conrado Ramos Moreira ;

Oliveira, Marcelo Falcao ;

Avila, Julian Arnaldo .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (07) :4925-4936

[8]

David D., P 24 INT C MET MAT M

[9] Simultaneous ageing and plasma nitriding of grade 300 maraging steel: How working pressure determines the effective nitrogen diffusion into narrow cavities [J].

Fernandez de Ara, J. ;

Almandoz, E. ;

Palacio, J. F. ;

Fuentes, G. G. .

SURFACE & COATINGS TECHNOLOGY, 2017, 317 :64-74

[10] Influence of temperature in arc-activated plasma nitriding of maraging steel in solution annealed and aged conditions [J].

Fernandez de Ara, J. ;

Almandoz, E. ;

Palacio, J. F. ;

Fuentes, G. G. ;

Rodriguez, R. J. ;

Garcia, J. A. .

SURFACE & COATINGS TECHNOLOGY, 2014, 258 :754-762

← 1 2 3 4 →