Low-temperature preparation of lightweight ceramic proppants using high-proportioned coal-based solid wastes

Lightweight ceramic proppants are prepared using coal gangue, fly ash, and bauxite as raw materials, and a mixture of manganese dioxide and magnesium oxide is used as composite additives. The total content of the coal gangue and fly ash in the raw materials reaches up to 70 wt%. The effects of coal gangue and fly ash precalcination, sintering temperature, and composite additive content on the phase compositions, microstructures, and performances of the resulting ceramic proppants are studied in detail. The ceramic proppant prepared at 1285 degrees C using 1 wt% of the composite additive is composed of quartz, corundum, and mullite. It also presents the desired sphericity, roundness, and microstructure. The apparent density, bulk density, and breakage ratio of the ceramic proppant described above are 2.55 +/- 0.06 g/cm3, 1.03 +/- 0.02 g/cm3, and 8.30 +/- 0.68% at 35 MPa, respectively. This ceramic proppant belongs to lightweight ceramic proppants and meets the requirement of the 5K grade in the standards of SY/T 5108-2014 and API STD 19C-2018.