Desalination Performance Evaluation of hBN@UiO-66 MOF Incorporated Hollow Fiber Membrane using Membrane Distillation

In the present study, the polyvinylidene fluoride (PVDF) modified hollow fiber (HF) membranes have been synthesized by dry-jet wet phase inversion technique for desalination via direct contact membrane distillation (DCMD). UiO-66 metal-Organic framework (MOF) and surface-modified UiO-66 with h-BN nanomaterial have been incorporated with PVDF-HF membrane. The various analytical methods like FE-SEM, FTIR, PXRD, TGA, tensile strength, were used to characterize prepared MOF and HF membranes. It was observed from DCMD results that the h-BN@UiO-66/PVDF (M3) HF membrane gives higher flux than UiO-66/PVDF (M2) and pure PVDF (M1) membrane. In the present investigation, response surface methodology (RSM) by box-behnken design (BBD) was used to optimize the DCMD system and evaluate the behavior of operating parameters such as feed temperature, feed concentration, and feed flow rate. The optimum operating values of feed temperature, feed flow rate, and feed concentration were found as 65 degrees C, 1 LPM, and 1.5 wt.%, respectively. Under optimum conditions, the M3 HF membrane gives the highest flux of 26.78 L/m(2) & sdot; h compared to M2 and M1 membranes. During DCMD, salt rejection is almost greater than 99.8 % for all prepared membranes. Other salts like potassium chloride (KCl), Magnisium Sulphate (MgSO4), and calcium sulphate (CaSO4) are also used to check salt rejection of all membranes at optimum operating conditions. Moreover, the M3 membrane exhibits stable permeate flux and high salt rejection (>99.9 %) at optimized process parameters over 80 h running. Overall, the present study provides the positive effects of h-BN nanoparticles and UiO-66 MOF on HF membrane to improve performance in DCMD.