Enhancing sound insulation performance with active constrained layer damping plates at low frequencies

In this paper, the normal incident sound transmission loss characteristics of active constrained layer damping (ACLD) plates are investigated numerically and experimentally. The sound insulation performance of the ACLD plate configuration with a centrally positioned 30 mm x 30 mm patch is initially examined in both passive and active control states. The analog feedback control strategy is employed to physically demonstrate that the ACLD treatment can effectively improve airborne sound insulation performance at low frequencies. To enhance control efficiency and mitigate control spillover effects, an edge-enhanced ACLD (EACLD) plate configuration is proposed, which enables a direct electrical connection between the PZT layer and base plate. Control mechanism is further analyzed from the perspectives of mean quadratic normal velocity and deformed modal shapes. Results show that, in the passive state, the formation of sound insulation peaks of the ACLD and EACLD plate configurations are attributed to structural anti-resonance effects. By applying active control, the shear deformation degree of the viscoelastic layer can be further increased, and the advantages of active and passive hybrid damping are formed. Therefore, the sound insulation performance of the EACLD plate configuration in the firstorder resonance region around 190 Hz can be enhanced by approximately 20 dB. The proposed EACLD plate configuration demonstrates a broad low-frequency sound insulation bandwidth and holds strong potential for engineering applications.