Effect of stabilization annealing on fatigue crack propagation behavior of inconel 706 alloy at 25 and 650 °C

被引：3

作者：

Kim, Youngbin ^{[1
]}

Bae, Jeongbin ^{[1
]}

Lee, Junmin ^{[1
]}

Kang, Hoseong ^{[1
]}

Kim, Jung Gi ^{[1
]}

Kim, Sangshik ^{[1
]}

机构：

[1] Gyeongsang Natl Univ, Dept Mat Engn & Convergence Technol, CMMS, Jinju 52828, South Korea

来源：

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2024年 / 30卷

关键词：

GROWTH-BEHAVIOR; MICROSTRUCTURAL CHARACTERIZATION; GRAIN-SIZE; SUPERALLOY; PRECIPITATION; TEMPERATURE; GAMMA';

D O I：

10.1016/j.jmrt.2024.05.030

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Stabilization annealing (SA) treatment is often performed on precipitation -hardened IN706 (Ni-37.7Fe-15.6Cr-3Nb-1.7Ti-0.23Al) before aging to improve the resistance to creep, while sacrificing the tensile properties. In this study, the effect of SA treatment on fatigue crack propagation (FCP) behavior of IN706 at 25 and 650 degrees C was examined based on detailed fractographic and micrographic analyses. IN706 specimen with SA treatment at 845 degrees C for 3 h showed a considerable amount of i precipitates, that were located along grain boundaries and within grains. It was found that i precipitates, particularly those linearly aligned within grains, provided easy crack path, reducing the resistance to FCP of IN706 at both 25 and 650 degrees C.

引用

页码：7084 / 7094

页数：11

共 50 条

[31] Oxide-induced crack closure: an explanation for abnormal time-dependent fatigue crack propagation behavior in INCONEL alloy 783
Ma, LZ
Chang, KM
Mannan, SK
SCRIPTA MATERIALIA, 2003, 48 (05) : 583 - 588
[32] Environmental effect of fatigue crack propagation of magnesium alloy
Kobayashi, Y.
Shibusawa, T.
Ishikawa, K.
Materials Science and Engineering A, 1997, A234-A236 : 220 - 222
[33] Environmental effect of fatigue crack propagation of magnesium alloy
Kobayashi, Y
Shibusawa, T
Ishikawa, K
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 : 220 - 222
[34] FATIGUE CRACK-GROWTH BEHAVIOR IN INCONEL-706 AT 297-K AND 4.2-K
LIAW, PK
LOGSDON, WA
ACTA METALLURGICA, 1988, 36 (07): : 1731 - 1744
[35] Effect of frequency on fatigue crack propagation behavior of the aluminum alloy 6013 in corrosive environment
Trockels, I
Lutjering, G
Gysler, A
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1599 - 1604
[36] EFFECT OF OVERLOADS ON FATIGUE CRACK-PROPAGATION BEHAVIOR IN AN EXTRUDED ALUMINUM-ALLOY
VECCHIO, RS
HERTZBERG, RW
MILLER, G
DONALD, K
JACCARD, R
JOURNAL OF METALS, 1982, 34 (08): : 63 - 63
[37] The effect of load ratio on fatigue life and crack propagation behavior of an extruded magnesium alloy
Ishihara, S.
McEvily, A. J.
Sato, M.
Taniguchi, K.
Goshima, T.
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (11-12) : 1788 - 1794
[38] Effect of frequency on fatigue crack propagation behavior of the aluminum alloy 6013 in corrosive environment
Technical Univ Hamburg Harburg, Hamburg, Germany
Mater Sci Forum, pt 3 (1599-1604):
[39] Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion
Kim, Sumin
Choi, Heesoo
Lee, Jehyun
Kim, Sangshik
INTERNATIONAL JOURNAL OF FATIGUE, 2020, 140
[40] Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy
Javadi, Hamid
Jomaa, Walid
Dalgaard, Elvi
Brochu, Myriam
Bocher, Philippe
12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018), 2018, 165

← 1 2 3 4 5 →