Adaptive super-twisting sliding mode control with neural network for electromechanical actuators based on friction compensation

被引:0
作者
Cao, Mengmeng [1 ]
Hu, Jian [1 ]
Yao, Jianyong [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Xiao Lingwei 200, Nanjing 210094, Peoples R China
基金
中国国家自然科学基金;
关键词
Electromechanical Actuators; friction compensation; super-twisting sliding mode control; adaptive control; neural networks; NONLINEAR-SYSTEMS; ROBUST-CONTROL; OBSERVER; DESIGN;
D O I
10.1177/09544062241271676
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Parameter uncertainties in the electromechanical actuator system and the obvious friction nonlinearity in the low speed stage will greatly deteriorate the control performance and even lead to system instability. In this paper, an adaptive super-twisting sliding mode controller with neural network (ASTSMNNC) is proposed for the electromechanical actuator system. The LuGre model is used to describe the nonlinear friction, a nonlinear dual-observer is designed to observe the LuGre model internal friction state, a parameter adaptive law is designed to estimate the unknown parameters existing in the system, the time-varying disturbance in the system is estimated by using the universal approximation property of neural network. The feedforward compensation technology is used to compensate the estimated errors of parameters and the observed error of disturbance, the second-order nonlinear sliding mode is designed to compensate the residual estimated errors of parameters and neural network, and the chattering phenomenon caused by the sliding mode control can be reduced at the same time. What's more, the controller theoretically guarantees a prescribed tracking performance in the presence of various uncertainties, which is very important for high-accuracy control of motion systems. Lyapunov stability theorem is used to prove that the proposed controller can achieve the bounded stability of the system. Extensive comparative experimental results are obtained to verify the high-performance nature of the proposed control strategy.
引用
收藏
页码:10581 / 10596
页数:16
相关论文
共 30 条
[1]   Design and Analysis of a Novel Neural Adaptive Super-Twisting Sliding Mode Controller For Uncertain Systems [J].
Abhinay, N. S. ;
Sridhar, Nithya ;
Shobhit, Shubhankar ;
Das, Kaushik .
2021 AMERICAN CONTROL CONFERENCE (ACC), 2021, :2145-2150
[2]   Adaptive neural network output feedback robust control of electromechanical servo system with backlash compensation and disturbance rejection [J].
Bai, Yanchun ;
Hu, Jian ;
Yao, Jianyong .
MECHATRONICS, 2022, 84
[3]   Adaptive Global Sliding Mode Control for MEMS Gyroscope Using RBF Neural Network [J].
Chu, Yundi ;
Fei, Juntao .
MATHEMATICAL PROBLEMS IN ENGINEERING, 2015, 2015
[4]   Second-order sliding-mode observer for mechanical systems [J].
Davila, J ;
Fridman, L ;
Levant, A .
IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 2005, 50 (11) :1785-1789
[5]   Adaptive integral robust control and application to electromechanical servo systems [J].
Deng, Wenxiang ;
Yao, Jianyong .
ISA TRANSACTIONS, 2017, 67 :256-265
[6]   Improvement of motion accuracy and energy consumption of a mechanical feed drive system using a Fourier series-based nonlinear friction model [J].
Farrage, Abdallah ;
Uchiyama, Naoki .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8) :1203-1214
[7]   Super-Twisting Sliding Mode Control for Micro Gyroscope Based on RBF Neural Network [J].
Feng, Zhilin ;
Fei, Juntao .
IEEE ACCESS, 2018, 6 :64993-65001
[8]   Disturbance-tailored super-twisting algorithms: Properties and design framework [J].
Haimovich, Hernan ;
De Battista, Hernan .
AUTOMATICA, 2019, 101 :318-329
[9]   Research on Active Disturbance Rejection Control Technology of Electromechanical Actuators [J].
Han, Jing ;
Wang, Hongfu ;
Jiao, Guotai ;
Cui, Liming ;
Wang, Yuren .
ELECTRONICS, 2018, 7 (09)
[10]   Global Sliding Mode Control based on a Hyperbolic Tangent Function for Matrix Rectifier [J].
Hu, Zhanhu ;
Hu, Wang ;
Wang, Zhiping ;
Mao, Yunshou ;
Hei, Chenyang .
JOURNAL OF POWER ELECTRONICS, 2017, 17 (04) :991-1003