Study of the flow characteristics of the dense bed and its enhancing effect on coal particles separation by CFD-DEM applied in Teeter bed separator

被引:0
|
作者
Liu, Junli [1 ]
Zhu, Xueshuai [2 ]
Lv, Fakui [1 ]
Ye, Guichuan [3 ]
Yao, Geng [1 ]
Qi, Xin [1 ]
Cong, Xingshun [1 ]
机构
[1] Zaozhuang Univ, Coll Chem Chem Engn & Mat Sci, Zaozhuang 277160, Shandong, Peoples R China
[2] China Univ Min & Technol Beijing, Sch Chem & Environm Engn, Beijing, Peoples R China
[3] Taiyuan Univ Technol, Coll Min Engn, Taiyuan, Peoples R China
基金
中国国家自然科学基金;
关键词
Teeter bed separator; CFD-DEM simulation; flow characteristics of the dense bed; particle separation; LIQUID-FLUIDIZED-BEDS; CLASSIFICATION; HYDRODYNAMICS; SIMULATION; RECOVERY; VELOCITY; MODEL; DRAG;
D O I
10.1080/19392699.2024.2390507
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Teeter bed separator (TBS) plays an important role in coal and mineral fines beneficiation. It is believed that a favorable dense concentrated bed is the key to ensuring the effective particle separation. This paper mainly presents the investigation of the flow characteristics of the dense bed and its enhancing effect on particle fines separation by CFD-DEM to reveal the complex separation behavior of TBS. First, the enhancing effect of the dense bed for separating real fine coal is experimentally studied. The specific simulation for particle motion is further verified by the literature experiment. The simulated dynamic behavior of the mismatch-prone particles reveals that the dense bed in the concentration range of 20-47% could promote particle separation by density. The fact is that a certain velocity difference is generated between mismatch-prone particles, and the smaller heavier particles move faster than the larger lighter particles. It is especially beneficial for separating fine coal material in TBS. The enhancing mechanism of the dense bed is further revealed by analyzing the mismatch-prone particle forces of collision and fluid drag force. Comprehensively, the appropriate bed concentration of 35-45% is suggested for the actual TBS operation.
引用
收藏
页数:21
相关论文
共 50 条
  • [1] CFD-DEM study of gas-solid flow characteristics in a fluidized bed with different diameter of coarse particles
    Zhou, Ling
    Lv, Wanning
    Bai, Ling
    Han, Yong
    Wang, Jian
    Shi, Weidong
    Huang, Gaoyang
    ENERGY REPORTS, 2022, 8 : 2376 - 2388
  • [2] Preliminary study on foreign slime for the gravity separation of coarse coal particles in a teeter bed separator
    Bu, Xiangning
    Ni, Chao
    Xie, Guangyuan
    Peng, Yaoli
    Ge, Linhan
    Sha, Jie
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2017, 160 : 76 - 80
  • [3] CFD-DEM study of effect of bed thickness for bubbling fluidized beds
    Li, Tingwen
    Gopalakrishnan, Pradeep
    Garg, Rahul
    Shahnam, Mehrdad
    PARTICUOLOGY, 2012, 10 (05) : 532 - 541
  • [4] CFD-DEM simulation of flow pattern and particle velocity in a fluidized bed with wet particles
    Song, Chengxiao
    Liu, Daoyin
    Ma, Jiliang
    Chen, Xiaoping
    POWDER TECHNOLOGY, 2017, 314 : 346 - 354
  • [5] Three-dimensional CFD-DEM investigation of dynamic characteristics of biomass particles in a conical spouted bed
    Hao, Ming
    Xing, Xiaolong
    PARTICUOLOGY, 2025, 97 : 207 - 218
  • [6] CFD-DEM study of thermal behaviours of chip-like particles flow in a fluidized bed
    Wang, Shuai
    Shen, Yansong
    POWDER TECHNOLOGY, 2024, 445
  • [7] CFD-DEM investigation of flow and heat transfer characteristics in a directly irradiated fluidized bed
    Zhou, Xiaochen
    Fu, Jianhong
    Chen, Sheng
    CHEMICAL ENGINEERING JOURNAL, 2023, 476
  • [8] CFD-DEM Study of heat and mass transfer of ellipsoidal particles in fluidized bed dryers
    Handayani, Sri Utami
    Wahyudi, Hadi
    Agustina, Sri
    Yulianto, Mohamad Endy
    Aryanto, Hermawan Dwi
    POWDER TECHNOLOGY, 2023, 425
  • [9] Influence of inclined plates on flow characteristics of a liquid-solid fluidised bed: A CFD-DEM study
    Peng, Zhengbiao
    Galvin, Kevin
    Doroodchi, Elham
    POWDER TECHNOLOGY, 2019, 343 : 170 - 184
  • [10] Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM
    Zhou, Heng
    Tian, Xu
    Kou, Mingyin
    Wu, Shengli
    Shen, Yansong
    POWDER TECHNOLOGY, 2021, 392 (392) : 317 - 324