Effect of different process water sources on rougher flotation efficiency of a copper ore: A case study at Sarcheshmeh Copper Complex (Iran)

In this research, the effect of different sources of process water on the flotation efficiency of copper sulfide ore prepared from the Sarcheshmeh copper mine was investigated. For this purpose, samples of fresh water to the plant, overflows of copper-molybdenum concentrate thickener, copper concentrate thickener, and recycled water pool as well as a mixture of fresh water and recycled water were prepared and characterized. Flotation tests were performed under the same conditions as the plant's rougher circuit and were kept constant during all experiments. Grade and recovery of copper, iron, molybdenum, and silica were selected as the metallurgical response of flotation tests. The results were subjected to statistical analysis to assess the relative significance of which water source affects the flotation performance as evaluated from the experimental results. The results showed that the copper concentrate thickener overflow had the greatest effect on the flotation efficiency, so the grade and recovery decreased by about 10% and 75% for copper, and 10% and 6% for iron in the concentrate, respectively, while the grade and recovery increased up to 0.1% and 12% for silica, and 3% and 25% for molybdenum, respectively. The reason for this effect was attributed to the high content of suspended relatively equal amount in all sources of process water, the effect of anions and ions of dissolved salts was difficult.