Effect of the leading-edge vortex generator on the performance of the linear cascade

被引:6
作者
Xu, Wenfeng [1 ]
Zou, Shilong [1 ]
Tang, Chengxi [1 ]
Ren, Guozhe [1 ]
Sun, Dan [1 ]
机构
[1] Shenyang Aerosp Univ, Sch Aeroengine, Lab Turbomachinery Adv Seal Technol, Shenyang 110136, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
TRANSONIC AXIAL COMPRESSOR; AERODYNAMIC PERFORMANCE; SEPARATION CONTROL; FLOW; IMPROVEMENTS;
D O I
10.1063/5.0201854
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper, based on the airflow improvement mechanism of dragonfly wing veins, a vortex generator is designed at the leading edge of the suction surface to improve the flow condition of compressor cascades. The influence of the placement positions and geometric dimensions of the vortex generators on the flow field structure and aerodynamic performance is investigated by numerical simulation. The research reveals that vortex generators at the leading edge of the suction surface can generate induced vortices near the end wall, suppressing the accumulation of low-energy fluid in the corner region. This results in a backward shift of the separation initiation point, a reduction in the corner separation region along the pitch direction, and a reduction in flow loss. The vortex generators exhibit favorable characteristics with positive incidence angles. However, when the incidence angle is below the minimum loss incidence angle, the vortex generators increase the flow losses of the cascade. Optimum performance is achieved when the vortex generators are positioned at the start of the corner separation. The flow control influence initially increases and then decreases as the height of the vortex generators increases. Similarly, the control impact is enhanced and then weakened as the placement position moves away from the suction surface. The flow losses decrease by 10.3% when the vortex generators are placed at the junction between the end wall recirculation and the mainstream region at a height equal to 2% of the blade height.
引用
收藏
页数:15
相关论文
共 43 条
  • [1] Effect of aero-shaped vortex generators on NACA 4415 airfoil
    Algan, Mesut
    Seyhan, Mehmet
    Sariog, Mustafa
    [J]. OCEAN ENGINEERING, 2024, 291
  • [2] Aerodynamic performance of profiled endwalls with upstream slot purge flow in a linear turbine cascade having pressure side separation
    Babu, Sushanlal
    Anish, S.
    [J]. PHYSICS OF FLUIDS, 2021, 33 (01)
  • [3] Flow Structures of Wishbone Vortex Generators and Their Interactions with a Backward-Facing Ramp
    Cheawchan, A.
    Mohamed, M. A.
    Ng, B. F.
    New, T. H.
    [J]. JOURNAL OF AEROSPACE ENGINEERING, 2023, 36 (01)
  • [4] Numerical study on endwall fence with varying geometrical parameters in a highly-loaded compressor cascade
    Chen, Yunzhi
    Yang, Ling
    Zhong, Jingjun
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2019, 94
  • [5] Chima R. V, 2002, ASME TURBO EXPO 2002, P1229, DOI DOI 10.1115/GT2002-30677
  • [6] Aerodynamic performance of transonic axial compressor with a casing groove combined with blade tip injection and ejection
    Cong-Truong Dinh
    Heo, Man-Woong
    Kim, Kwang-Yong
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2015, 46 : 176 - 187
  • [7] Deich M. E., 1962, Teplienergetika, V8, P42
  • [8] Denton J, 1993, J. Turbomach, V115, P621, DOI [10.1115/1.2929299, DOI 10.1115/1.2929299]
  • [9] Diaa A. M., 2015, Advances in Aerospace Technology, V1
  • [10] Parameter study on numerical simulation of corner separation in LMFA-NACA65 linear compressor cascade
    Gao Feng
    Ma Wei
    Sun Jinjing
    Boudet, Jerome
    Ottavy, Xavier
    Liu Yangwei
    Lu Lipeng
    Shao Liang
    [J]. CHINESE JOURNAL OF AERONAUTICS, 2017, 30 (01) : 15 - 30