Numerical-experimental study on the crashworthiness of a windshield A-pillar

被引：0
作者：
Armentani, Enrico [1 ]
Perrella, Michele [1 ]
Cepollaro, Massimiliano [1 ]
Cepollaro, Fulvio [2 ]
D'Errico, Giuseppe [2 ]
Giannella, Venanzio [3 ]
机构：
[1] Univ Naples Federico II, Dept Chem Mat & Prod Engn, I-80125 Naples, Italy
[2] Stellantis NV, I-80038 Pomigliano Darco, NA, Italy
[3] Univ Salerno, Dept Ind Engn, I-84084 Fisciano, SA, Italy
来源：
FORCES IN MECHANICS | 2024年 / 15卷
关键词：
Crashworthiness; Windshield A-pillar; FEM; Impact test; Vehicles;
D O I：
10.1016/j.finmec.2024.100273
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This document reports a numerical and experimental crashworthiness study of a vehicle structural component. Particularly, a windshield A-pillar made of a novel high-strength steel was tested on an apparatus for impact tests that was in-house designed so as to reproduce the effects of a vehicle side impact crash. In parallel, numerical simulations were performed using the explicit finite element code LS-DYNA, considering different elastic-plastic material constitutive laws with damage. A comparison between numerical and experimental outcomes demonstrated a satisfactory correlation, with the GISSMO model that provided a good correlation and needed a relatively low computational effort.
引用
收藏
页数：8
相关论文
共 34 条
  • [11] Mechanical behavior of chemically-treated hemp fibers reinforced composites subjected to moisture absorption
    Bollino, Flavia
    Giannella, Venanzio
    Armentani, Enrico
    Sepe, Raffaele
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 762 - 775
  • [12] Assessment of Crash Performance of an Automotive Component Made through Additive Manufacturing
    Borrelli, Alessandro
    D'Errico, Giuseppe
    Borrelli, Corrado
    Citarella, Roberto
    [J]. APPLIED SCIENCES-BASEL, 2020, 10 (24): : 1 - 11
  • [13] Experimental and Numerical Crashworthiness Study of a Full-Scale Composite Fuselage Section
    Caputo, F.
    Lamanna, G.
    Perfetto, D.
    Chiariello, A.
    Di Caprio, F.
    Di Palma, L.
    [J]. AIAA JOURNAL, 2021, 59 (02) : 700 - 718
  • [14] Established Numerical Techniques for the Structural Analysis of a Regional Aircraft Landing Gear
    Caputo, F.
    De Luca, A.
    Greco, A.
    Marro, A.
    Apicella, A.
    Sepe, R.
    Armentani, E.
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
  • [15] Additive Manufacturing in Industry
    Citarella, Roberto
    Giannella, Venanzio
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (02): : 1 - 3
  • [16] Mixed FE-MB methodology for the evaluation of passive safety performances of aeronautical seats
    di Napoli, F.
    De Luca, A.
    Caputo, F.
    Marulo, F.
    Guida, M.
    Vitolo, B.
    [J]. INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2019, 24 (03) : 314 - 325
  • [17] Vertical Drop Test of Composite Fuselage Section of a Regional Aircraft
    Di Palma, L.
    Di Caprio, F.
    Chiariello, A.
    Ignarra, M.
    Russo, S.
    Riccio, A.
    De Luca, A.
    Caputo, F.
    [J]. AIAA JOURNAL, 2020, 58 (01) : 474 - 487
  • [18] Du Bois P., 2004, Automotive Applications Committee
  • [19] Survey of Cooperative Advanced Driver Assistance Systems: From a Holistic and Systemic Vision
    Felipe Gonzalez-Saavedra, Juan
    Figueroa, Miguel
    Cespedes, Sandra
    Montejo-Sanchez, Samuel
    [J]. SENSORS, 2022, 22 (08)
  • [20] Fiorentin T., 2022, SAE Technical Paper
1234