The Influence of Moisture Absorption and Desorption by the ABS Filament on the Properties of Additively Manufactured Parts Using the Fused Deposition Modeling Method

被引:3
作者
Hamrol, Adam [1 ]
Goralski, Blazej [1 ]
Wichniarek, Radoslaw [1 ]
机构
[1] Poznan Univ Tech, Fac Mech Engn, Piotrowo 3, PL-60138 Poznan, Poland
关键词
additive manufacturing; fused deposition modelling; ABS; filament moisture; moisture absorption; moisture desorption; WATER-ABSORPTION; FABRICATION; HUMIDITY; POLYMER; FDM;
D O I
10.3390/ma17091988
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This paper presents the results of research on the influence of the moisture content in a filament made of ABS polymer on the properties of products manufactured using FDM (fused deposition modeling). Tests were carried out on a standard printer, using the parameters recommended by the manufacturer and the literature on the subject. A special climatic chamber was used to condition the material. A negative impact of ABS filament moisture on the strength and dimensional accuracy of printed products and on the structure of their surface is demonstrated. When the range of the filament moisture is between 0.17% and 0.75%, the strength decreases by 25% and the sample thickness increases by 10%. It is also shown that this effect does not depend on the history of the polymer reaching a given moisture level, i.e., by absorbing moisture in the absorption process or releasing moisture in the desorption process.
引用
收藏
页数:16
相关论文
共 38 条
[1]  
Aczel A.D., 2020, Complete Business Statistics
[2]   Creep Behavior of ABS Polymer in Temperature-Humidity Conditions [J].
An, Teagen ;
Selvaraj, Ramya ;
Hong, Seokmoo ;
Kim, Naksoo .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (06) :2754-2762
[3]  
[Anonymous], 2019, ISO 527-1:2019
[4]  
[Anonymous], 1998, 5271998 PNEN ISO
[5]  
[Anonymous], 2021, 529002021 ISO ASTM
[6]   Moisture-induced changes in the mechanical behavior of 3D printed polymers [J].
Banjo, Adedotun D. ;
Agrawal, Vinamra ;
Auad, Maria L. ;
Celestine, Asha-Dee N. .
COMPOSITES PART C: OPEN ACCESS, 2022, 7
[7]   Effect of water absorption in polymers at low and high temperatures [J].
Baschek, G ;
Hartwig, G ;
Zahradnik, F .
POLYMER, 1999, 40 (12) :3433-3441
[8]  
Duncan B.C., 2007, ABSORPTION DIFFUSION
[9]  
Duncan B.C., 2005, 012 DEPC MPR NAT PHY
[10]  
Ehrenstein G.W., 2016, Polymer Materials, Structure and Properties