Seismic Performance of Moment-Resisting-Eccentrically Braced Dual Frame Equipped with Detachable Links

被引:1
作者
Tartaglia, Roberto [1 ]
D'Aniello, Mario [2 ]
Maddaloni, Giuseppe [1 ]
Landolfo, Raffaele [2 ]
机构
[1] Univ Sannio, Dept Engn DING, Piazza Roma, I-82100 Benevento, Italy
[2] Univ Naples Federico II, Dept Struct Engn & Architecture, Via Forno Vecchio, I-80134 Naples, Italy
来源
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 11期
关键词
dual frames; eccentrically braced frame; detachable links; seismic design; static non-linear analysis; BUILDINGS;
D O I
10.3390/app14114676
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Moment-resisting frames (MRFs) and eccentrically braced frames (EBFs) can be effectively combined in multi-story steel buildings. In fact, MRFs provide redundancy and ductility, while EBFs provide initial and post-yield stiffness with high energy dissipation capacity. In addition, if detachable links are designed as dissipative fuses, it is possible to activate their almost contemporary yielding and prevent the collapse of structures during severe earthquakes, ensuring easy repair and rehabilitation measures. The seismic responses of dual frames with MRFs and EBFs are investigated by means of pushover analyses. Different buildings were designed, varying the number of floors (two, four, and eight stories), the number of MRF spans (zero, one, and two), and the length of the short links (0.8 Mp/Vp and 1.6 Mp/Vp). The obtained results confirmed the superior behavior of dual frames with respect to simple EBFs. In addition, it was observed that the frames with the shorter links exhibited higher resistance and rigidity but smaller overall displacement capacity because of the anticipated failure of the links.
引用
收藏
页数:13
相关论文
共 21 条
[1]  
[Anonymous], 2005, EN 1993-1-1, DOI DOI 10.1017/CBO9781107415324.004
[2]  
[Anonymous], 2022, ANSI/AISC 341-22 Seismic Provisions for Structural, Steel Buildings
[3]   A design procedure for dual eccentrically braced-moment resisting frames in the framework of Eurocode 8 [J].
Bosco, M. ;
Marino, E. M. ;
Rossi, P. P. .
ENGINEERING STRUCTURES, 2017, 130 :198-215
[4]  
Bosco M., 2014, P 2 EUR C EARTHQ ENG
[5]   Critical review of the EC8 design provisions for buildings with eccentric braces [J].
Bosco, Melina ;
Marino, Edoardo M. ;
Rossi, Pier Paolo .
EARTHQUAKES AND STRUCTURES, 2015, 8 (06) :1407-1433
[6]   Seismic damage analysis due to near-fault multipulse ground motion [J].
Chen, Guan ;
Yang, Jiashu ;
Wang, Ruohan ;
Li, Kaiqi ;
Liu, Yong ;
Beer, Michael .
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2023, 52 (15) :5099-5116
[7]   An energy-frequency parameter for earthquake ground motion intensity measure [J].
Chen, Guan ;
Yang, Jiashu ;
Liu, Yong ;
Kitahara, Takeshi ;
Beer, Michael .
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2023, 52 (02) :271-284
[8]   Design implementation of re-centring dual eccentrically braced frames with removable links [J].
Chesoan, Adriana ;
Stratan, Aurel ;
Dubina, Dan .
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, 2018, 112 :174-184
[9]   Seismic pre-qualification tests of EC8-compliant external extended stiffened end-plate beam-to-column joints [J].
D'Aniello, Mario ;
Tartaglia, Roberto ;
Landolfo, Raffaele ;
Jaspart, Jean-Pierre ;
Demonceau, Jean-Francois .
ENGINEERING STRUCTURES, 2023, 291
[10]  
Dubina D., 2016, Proc. Rom. Acad, V17, P167