Enhancing performance in solar air channels: A numerical analysis of turbulent flow and heat transfer with novel shaped baffles

被引:9
作者
Jamal, Ikrame [1 ]
Barhdadi, Fatima-Zahra [1 ]
Amghar, Kamal [1 ,2 ]
Daoudi, Salah [1 ]
Yahiaoui, Reda [3 ]
Ghoumid, Kamal [4 ]
机构
[1] Mohammed First Univ, Fac Sci, Lab Mech & Energy LME, Oujda 60000, Morocco
[2] Abdelmalek Essaadi Univ, Natl Sch Appl Sci, Dept LSIA, Al Hoceima, Morocco
[3] Univ Franche Comte, Lab Nanomed Imaging Therapeut UFR Sci & Tech, F-25000 Besancon, France
[4] Mohammed First Univ, Natl Sch Appl Sci, Lab Engn Sci, Oujda 60000, Morocco
关键词
Solar air channel; not equal"-shaped baffles; Heat transfer; Turbulence modeling; CFD simulation; TRANSFER ENHANCEMENT; RECTANGULAR CHANNEL; THERMAL PERFORMANCE; SQUARE CHANNEL; RIB ROUGHNESS; FLUID-FLOW; DUCT; FRICTION; TUBE;
D O I
10.1016/j.applthermaleng.2024.123561
中图分类号
O414.1 [热力学];
学科分类号
摘要
Solar air heaters are emerging as a promising solution for sustainable heating, as they harness abundant solar energy to provide heat for a variety of applications. However, their optimum efficiency remains a major challenge. Deflectors have significant potential to improve the performance of solar air heaters by redirecting airflow and optimizing heat transfer, making them more efficient and more suitable for large-scale adoption. This article examines the performance of a new baffle design aimed at improving heat transfer in the channel by increasing the exchange surface between fluid and solid surface. It consists of a "#"-shaped baffle mounted on the top and bottom walls of the channel. An in-depth analysis of the spacing between these baffles was carried out to assess their impact on the thermal and aerodynamic properties of the solar air channel. Computational Fluid Dynamics (CFD) was used to perform the calculations, using the Finite Volume Method (FVM) in conjunction with the SIMPLE algorithm. All studies are carried out using the CFD code Fluent. Crucial steps in this research include studying the influence of these new baffles at different Reynolds numbers, ranging from 15000 to 35000, as well as varying the separation distance between the two baffles, chosen periodically (D-Baffle/2,3(Baffle)/4, D-Baffle, 5D(Baffle)/4 and 3D(Baffle)/2). Some of the numerical results were validated with the available experimental data and showed satisfactory agreement. The study identified an optimal case for the new baffles, by reducing the distance between the baffles, an improvement in system performance was observed, by increasing the flow strength and widening the recycling cells, which has an impact on dynamic behavior and heat transfer. The presence of this new baffle design, with minimal separation distance between them, demonstrated a significant thermal improvement, with a thermal improvement factor increasing by 44% compared to the simple channel without baffles, thus highlighting the effectiveness of the new solar air channel with "not equal"-shaped baffles.
引用
收藏
页数:16
相关论文
共 57 条
[1]  
Akcay S, Heat Transfer Res.
[2]  
Akcay S, 2023, J ENHANC HEAT TRANSF, V30, P61
[3]   Numerical analysis of heat transfer improvement for pulsating flow in a periodic corrugated channel with discrete V-type winglets [J].
Akcay, Selma .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2022, 134
[4]   Experimental investigation on heat transfer enhancement due to V-shaped perforated blocks in a rectangular duct of solar air heater [J].
Alam, Tabish ;
Saini, R. P. ;
Saini, J. S. .
ENERGY CONVERSION AND MANAGEMENT, 2014, 81 :374-383
[5]   Review on the design modifications of a solar air heater for improvement in the thermal performance [J].
Arunkumar, H. S. ;
Karanth, K. Vasudeva ;
Kumar, Shiva .
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2020, 39
[6]   The effect of the inclined perforated baffle on heat transfer and flow patterns in the channel [J].
Ary, B. K. P. ;
Lee, M. S. ;
Ahn, S. W. ;
Lee, D. H. .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (10) :1578-1583
[7]   Nusselt number and friction factor correlations for solar air heater duct having artificially roughened absorber plate [J].
Bhushan, Brij ;
Singh, Ranjit .
SOLAR ENERGY, 2011, 85 (05) :1109-1118
[8]   Numerical investigation on turbulent forced convection and heat transfer characteristic in a square channel with discrete combined V-baffle and V-orifice [J].
Boonloi, Amnart ;
Jedsadaratanachai, Withada .
CASE STUDIES IN THERMAL ENGINEERING, 2016, 8 :226-235
[9]   Influence of the rectangular baffle on heat transfer and pressure drop in the solar collector [J].
Chabane, Foued ;
Kherroubi, Djaber ;
Arif, Ali ;
Moummi, Noureddine ;
Brima, Abdelhafid .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2024, 46 (01) :8547-8563
[10]   Experimental heat transfer and flow simulations of rectangular channel with twisted-tape pin-fin array [J].
Chang, S. W. ;
Wu, P-S ;
Cai, W. L. ;
Yu, C. H. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 166