Comparison of the Quality of Gas Equipment at Metallurgical and Coke-Chemical Enterprises and Production Plants

被引：2

作者：

Filin, Alexander ^{[1
]}

Kolbina, Irina ^{[1
]}

Seidaliyev, Askar ^{[2
]}

Kolesnikov, Alexandr ^{[3
]}

Syrlybekkyzy, Samal ^{[2
]}

Suleimenova, Botagoz ^{[2
]}

Seidaliyeva, Leila ^{[2
]}

Nurshakhanova, Lazzat ^{[4
]}

Kenzhibayeva, Gulmira ^{[5
]}

Kamshybayev, Akhmetali ^{[6
]}

Koibakova, Symbat ^{[4
]}

Mankesheva, Olimpiada ^{[7
]}

机构：

[1] Natl Res Technol Univ, Moscow Inst Steel & Alloys, Dept Technosphere Safety, Moscow, Russia

[2] Sh Yessenov Caspian Univ Technol & Engn, Dept Ecol & Geol, Aktau 130002, Kazakhstan

[3] M Auezov South Kazakhstan Univ, Dept Life Safety & Environm Protect, Shymkent 160012, Kazakhstan

[4] Sh Yessenov Caspian Univ Technol & Engn, Dept Petrochem Engn, Aktau 130002, Kazakhstan

[5] M Auezov South Kazakhstan Univ, Dept Ecol, Shymkent 160012, Kazakhstan

[6] M Auezov South Kazakhstan Univ, Dept Water Resources Land Use & Agr Engn, Shymkent 160012, Kazakhstan

[7] Sh Yessenov Caspian Univ Technol & Engn, Dept Maritime Acad, Aktau, Kazakhstan

来源：

POLISH JOURNAL OF ENVIRONMENTAL STUDIES | 2024年 / 33卷 / 03期

关键词：

gas control points; visual control; technical regulations; life safety; environmental protection;

D O I：

10.15244/pjoes/177442

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Gas at the metallurgical plant is distributed through gas control points. To date, on the territory of the Russian Federation and the CIS countries, the absence of a unified approved methodology for visual and measuring quality control of gas control points has been revealed. The lack of a unified methodology does not allow for a quick decision on the correct technology for assembling and welding a structural element, as well as subsequently preventing accidents and emergency situations, in turn, the requirements for the quality of structures and monitoring of emergency and emergency situations are provided for by the safety rules in the gas industry. Objects of metallurgical and coke chemical enterprises and production plants. The article studies and conducts comparative analyses of measures and procedures carried out during the preparation and conduct of visual and measuring control at metallurgical and coke chemical enterprises, where the permissible measurement error should be within 0.1-1.0 mm in order to ensure the safety of life and environmental protection.

引用

页码：2999 / 3008

页数：10

共 35 条

[1] [Anonymous], 2019, TR CU 010/2011, V15
[2] [Anonymous], 2021, Order No. 536, V369
[3] [Anonymous], 2001, Safety Rules 11-401-01, P82
[4] [Anonymous], 2021, Order of Rostekhnadzor N 440, V50
[5] BALOVTSEV S.V., 2023, MIAB. Mining Informational and Analytical Bulletin, V2, P139
[6] BALOVTSEV S.V., 2021, MIAB. Mining Informational and Analytical Bulletin, V2-1, P40
[7] CHURILIN A.V., 2014, Points Reduction of Gas. Study guide. FGBOU VPO "TSTU, V91
[8] Dakhno A.V., 2022, Construction Materials and Products, V5, P5, DOI 10.34031/2618-7183-2022-5-1-5-14
[9] PROSPECTS OF SAFETY CONTROL IN COMBINATION OF MINING AND METALLURGY INDUSTRIES
Filin, A. E.
Zinovieva, O. M.
Kolesnikova, L. A.
Merkulova, A. M.
[J]. EURASIAN MINING, 2018, (01): : 31 - 34
[10] Filin A.E., 2022, Ugol, V9, P67, DOI [10.18796/0041-5790-2022-9-67-72, DOI 10.18796/0041-5790-2022-9-67-72]

← 1 2 3 4 →