Dry Sliding Wear Behavior of Titanium-(TiB plus TiC) in situ Composite Developed by Spark Plasma Sintering

被引：16

作者：

Balaji, V. S. ^{[1
]}

Kumaran, S. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Met & Mat Engn, Tiruchirappalli 620015, Tamil Nadu, India

来源：

TRIBOLOGY TRANSACTIONS | 2015年 / 58卷 / 04期

关键词：

Titanium; In Situ Composite; Wear; Spark Plasma Sintering; BORIDE TIB; MATRIX; FRICTION;

D O I：

10.1080/10402004.2014.993780

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The present study provides insight into the dry sliding wear behavior of Ti-(TiB+TiC) in situ composite. The composite was developed from a Ti-B4C powder mixture in three different proportions. The evolution of the morphology and in situ phase formation were characterized using optical microscopy, X-ray diffraction, scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The sintered Ti-(TiB+TiC) composite showed an improved hardness and wear resistance with increasing TiB and TiC particulates. The friction and wear characteristics of the Ti-(TiB+TiC) composite were investigated using a pin-on-disc tester and were evaluated using SEM and EDS.

引用

页码：698 / 703

页数：6

共 28 条

[1] The abrasive wear of sintered titanium matrix-ceramic particle reinforced composites [J].

Alman, DE ;

Hawk, JA .

WEAR, 1999, 225 :629-639

[2] EFFECT OF MICROSTRUCTURE (PARTICULATE SIZE AND VOLUME FRACTION) AND COUNTERFACE MATERIAL ON THE SLIDING WEAR-RESISTANCE OF PARTICULATE-REINFORCED ALUMINUM-MATRIX COMPOSITES [J].

ALPAS, AT ;

ZHANG, J .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (05) :969-983

[3]

[Anonymous], 1995, Friction and Wear of Materials

[4] CONTACT AND RUBBING OF FLAT SURFACES [J].

ARCHARD, JF .

JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) :981-988

[5]

Blau P., 1992, Friction, lubrication and Wear Technologies, V18th, DOI [10.31399/asm.hb.v18.9781627081924, DOI 10.31399/ASM.HB.V18.9781627081924]

[6]

Bowden F.P., 1950, FRICTION LUBRICATION, V1st ed.

[7]

Bowden F.P., 1965, The friction and lubrication of solids, Part II

[8]

BOWDEN FP, 1953, INFLUENCE SURFACE FI, P197

[9]

Burwell J.T., 1957, WEAR, V1, P119, DOI DOI 10.1016/0043-1648(57)90005-4

[10] Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium [J].

Chelliah, Nagaraj ;

Kailas, Satish V. .

WEAR, 2009, 266 (7-8) :704-712

← 1 2 3 →