Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel

被引:2
作者
Vandzura, Radoslav [1 ]
Simkulet, Vladimir [1 ]
Botko, Frantisek [1 ]
Gel'atko, Matus [1 ]
Hatala, Michal [1 ]
机构
[1] Tech Univ Kosice Seat Presov, Fac Mfg Technol, Presov 08001, Slovakia
关键词
abrasive water jet; additive manufacturing; stainless steel; 316L; erosion track; green machining; JET MACHINING PROCESS; DEPTH;
D O I
10.3390/ma17122964
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The presented manuscript focuses on the influence of process parameters of abrasive water jet technology on the creation of non-transient erosive grooves. The processed stainless steel SS 316L is additively manufactured using the selective laser melting (SLM) method. Due to the distinct mechanical properties of this material resulting from the production process, the material was machined in two planes according to the direction of the printing layers. The experimental part employed a planned experiment utilizing the DoE (Design of Experiment) method. Experiments aimed at varying process parameters (traverse speed, standoff distance, abrasive mass flow) were conducted at a water pressure of 50 MPa, assessing the parameters' impact on the removed material and the properties of the resulting non-transient erosion groove. The properties of the erosion groove, such as shape and the material removal (area of erosion groove), were evaluated. The influences of process parameters on the observed parameters were assessed using the analysis of variance (ANOVA) method. Experiment preparation and setup were based on a thorough theoretical analysis of the machining process with the abrasive water jet (AWJ) method. The experiment also highlights the diverse properties of the SS 316L material prepared using the SLM method when machined with AWJ technology.
引用
收藏
页数:17
相关论文
共 50 条
[41]   Strain gradient plasticity modeling of nanoindentation of additively manufactured stainless steel [J].
Ding, Kunqing ;
Zhang, Yin ;
Birnbaum, Andrew J. ;
Michopoulos, John G. ;
McDowell, David L. ;
Zhu, Ting .
EXTREME MECHANICS LETTERS, 2021, 49
[42]   Softening Mechanisms in Additively Manufactured 420 Stainless Steel at Elevated Temperatures [J].
Bongao, Harveen ;
Pasco, Jubert ;
McCarthy, Thomas ;
Nyamuchiwa, Kudakwashe ;
Aranas, Clodualdo .
TMS 2024 153RD ANNUAL MEETING & EXHIBITION: SUPPLEMENTAL PROCEEDINGS, 2024, :244-253
[43]   Thermochemical post-processing of additively manufactured austenitic stainless steel [J].
Funch, Cecilie, V ;
Somlo, Kinga ;
Christiansen, Thomas L. ;
Somers, Marcel A. J. .
SURFACE & COATINGS TECHNOLOGY, 2022, 441
[44]   Welding of additively and conventionally manufactured 316L stainless steel [J].
Hemwat, Jirayu ;
Seenawat, Mongkol ;
Promoppatum, Patcharapit ;
Pandee, Phromphong .
MATERIALS TODAY COMMUNICATIONS, 2025, 46
[45]   Grain boundary character distribution in an additively manufactured austenitic stainless steel [J].
Laleh, Majid ;
Hughes, Anthony E. ;
Tan, Mike Y. ;
Rohrer, Gregory S. ;
Primig, Sophie ;
Haghdadi, Nima .
SCRIPTA MATERIALIA, 2021, 192 :115-119
[46]   Solidification-driven orientation gradients in additively manufactured stainless steel [J].
Polonsky, Andrew T. ;
Lenthe, William C. ;
Echlin, McLean P. ;
Livescu, Veronica ;
Gray, George T., III ;
Pollock, Tresa M. .
ACTA MATERIALIA, 2020, 183 :249-260
[47]   Influence of native oxide film on corrosion behavior of additively manufactured stainless steel 316L [J].
Choundraj, Jahnavi Desai ;
Kelly, Robert G. ;
Monikandan, Rebhadevi ;
Singh, Preet M. ;
Kacher, Josh .
CORROSION SCIENCE, 2023, 217
[48]   Influence of defect characteristics on tensile deformation of an additively manufactured stainless steel: Evolutions of texture and intergranular strain [J].
Choo, Hahn ;
Koehler, Michael R. ;
White, Logan P. ;
Ren, Yang ;
Morin, Derek ;
Garlea, Elena .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
[49]   Influence of internal and surface defects on the fatigue performance of additively manufactured stainless steel 316L [J].
Dastgerdi, Jairan Nafar ;
Jaberi, Omid ;
Remes, Heikki .
INTERNATIONAL JOURNAL OF FATIGUE, 2022, 163
[50]   Microscale residual stresses in additively manufactured stainless steel: Computational simulation [J].
Hu, Daijun ;
Grilli, Nicolo ;
Wang, Lu ;
Yang, Min ;
Yan, Wentao .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2022, 161