Improving the efficiency of acidic eluents for elution of Scandium from Lewatit® VP OC 1026 and TP 272 solvent impregnated ion exchange resins

Scandium is a strategic element with exceptional applications however, its widespread application has been limited mainly due to its high price which itself originates from lack of enriched primary reserves. Mineralized waste materials and mine tailings collected from various mining activities often contain low amounts of Sc and rare earth elements (REE), along with much higher levels of contaminants such as Si, Fe and Al. Ion exchange resins, especially phosphorus containing solvent impregnated ones, show extremely high selectivity for quantitative adsorption of Sc from pregnant leach solutions. However, efficient and economical elution of Sc from these types of resins is still a challenge. In this study, a series of water miscible organic solvents including methanol, ethanol, 1-propanol, 2-propanol and acetone are explored with sulfuric acid in elution of Sc at room temperature (25 degrees C). With the proposed binary solvent system in this study, 98% of the adsorbed Sc was eluted from VP OC 1026 (impregnated with D2EHPA) with 4 M H2SO4 in 50 vol.% 1-propanol while negligible amount of Sc could be recovered with 2 M H2SO4 even at high temperatures. Also, exceeding 97% of the loaded Sc on TP 272 (impregnated with Cyanex 272) could be successfully eluted with 6 M H2SO4 containing 50 vol.% 2-Propanol. Nevertheless, the elution efficiency of Sc from TP 272 was notably constrained, falling below 20 %, when 2 M H2SO4 was employed as the eluent. The added organic solvents also significantly increased the performance of H2SO4 in elution of Sc from the resins in columns. The addition of just 10 vol.% 2-propanol to 2 M H2SO4 led to significant increase in the elution of Sc from TP 272. The maximum concentration of Sc in the eluted fractions increased by over threefold, going from 167.0 mg/L to 532.6 mg/L, when compared to using 2 M H2SO4 under similar elution conditions.