The Application of Genetic Algorithm in Design of 3D Printed High Altitude Balloon Capsule

被引：0
|
作者：
Gocyla, Michal [1 ]
机构：
[1] Neuronator, Krakow, Poland
来源：
SELECTED PROCEEDINGS OF THE 6TH SPACE RESOURCES CONFERENCE, KGK 2023 | 2024年
关键词：
Evolutionary algorithms; Stratospheric missions;
D O I：
10.1007/978-3-031-53610-6_7
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
Genetic algorithms were applied to design high altitude balloon capsules. Capsule was printed from PLA in FFF and sent into the stratosphere with biological samples. As predicted cargo was not harmed, energy of the landing was absorbed by energy absorbing structures. To lower the mass of the capsule and mission level of risk every generated design underwent 3000 virtual landings on randomly generated surfaces. First batch of 100 designs was generated semi-randomly, following 99 batches came from averaging alphanumeric strings which contained a full description of designs (one string contained description of one design). Amount of designs in a batch was constant.
引用
收藏
页码：75 / 80
页数：6
相关论文
共 50 条
  • [1] Genetic Algorithm Design of a 3D Printed Heat Sink
    Wu, Tong
    Ozpineci, Burak
    Ayers, Curtis
    APEC 2016 31ST ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, 2016, : 3529 - 3536
  • [2] The Use of 3D Printing to Enable High Altitude Balloon Missions
    Straub, Jeremy
    2014 IEEE AEROSPACE CONFERENCE, 2014,
  • [3] 3D Airspace Sector Design by Genetic Algorithm
    Sergeeva, Marina
    Delahaye, Daniel
    Mancel, Catherine
    2015 INTERNATIONAL CONFERENCE ON MODELS AND TECHNOLOGIES FOR INTELLIGENT TRANSPORTATION SYSTEMS (MT-ITS), 2015, : 499 - 506
  • [4] Capability demonstration of a 3D CdZnTe detector on a high-altitude balloon flight
    Abraham, Sara
    Zhu, Yuefeng
    Nowicki, Suzanne
    Bloser, Peter
    Berry, James
    Sandoval, Benigno
    Lanctot, Sara
    Petryk, Matthew
    Deming, Jonathan
    Klimenko, Alexei
    He, Zhong
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2023, 1054
  • [5] High-altitude balloon shape calculation and general algorithm design
    Zhou J.
    Jin W.
    Li Z.
    Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology, 2021, 43 (04): : 17 - 23
  • [6] Design of an autofocus capsule endoscope system and the corresponding 3D reconstruction algorithm
    Zhang, Wei
    Jin, Yi-Tao
    Guo, Xin
    Su, Jin-Hui
    You, Su-Ping
    JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 2016, 33 (10) : 1970 - 1977
  • [7] Application of quality by design for 3D printed bone prostheses and scaffolds
    Martinez-Marquez, Daniel
    Mirnajafizadeh, Ali
    Carty, Christopher P.
    Stewart, Rodney A.
    PLOS ONE, 2018, 13 (04):
  • [8] Design of a 3D Printed Omnidirectional Antenna for 60 GHz Application
    Ratajczak, Philippe
    2019 13TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2019,
  • [9] Design and Evaluation of a 3D Printed Bio-Compatible Capsule for Implantable Telemetry Systems
    Fricke, Kyle
    Sobot, Robert
    Hodgson, Chad
    2014 IEEE BIOMEDICAL CIRCUITS AND SYSTEMS CONFERENCE (BIOCAS), 2014, : 368 - 371
  • [10] 3D printed material application in orthodontics
    Gupta, Deepak Kumar
    Tuli, Ashna
    Jain, Ashish
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 1635 - 1642
12345