Study on the biaxial mechanical behavior of steel fiber reinforced recycled aggregate concrete

Steel fiber reinforced recycled aggregate concrete (SFRAC) was proposed considering the enhancement of mechanical properties by incorporating steel fibers and the reduction of environmental impacts and cost due to the addition of recycled aggregates. To better understand the mechanical properties of SFRAC under biaxial compression and its failure criteria, 150 SFRAC specimens were prepared with different replacement ratios of recycled coarse aggregate (50%, 75%, 100%) and volume fractions of steel fibers (0%, 0.6%, 1.2%, 1.8%). In addition, various stress ratios were considered in the biaxial compression test (01:02=0:1.0, 0.2:1.0, 0.5:1.0, 0.7:1.0, 1.0:1.0). The results indicated that the failure of SFRAC was observed as columnar and splitting modes depending on the biaxial stress ratio. The impacts of the considered variables on the biaxial peak strength were studied. The increasing volume fraction of steel fibers tended to improve the biaxial peak strength of SFRAC within a threshold beyond which the impact was negative. Similarly, the biaxial strength of most SFRAC samples showed a pessimum effect when the biaxial loading stress ratio was higher than 0.7, though they were still higher than the uniaxial compressive strength. A failure criterion for SFRAC under biaxial compression loading is proposed, in which four parameters are included. The calculations are in good agreement with the experimental results.