Investigation on the fracture mechanics characteristics and crack initiation of deep dense shale

被引:7
作者
Xiao, Ming -Li [1 ,2 ]
Xie, Hong-Qiang [1 ,2 ]
Feng, Gan [1 ,2 ]
He, Qiang [1 ,2 ]
Liu, Huai-Zhong [1 ,2 ]
Zhuo, Li [1 ,2 ]
机构
[1] Sichuan Univ, Coll Water Resource & Hydropower, Chengdu 610065, Peoples R China
[2] Sichuan Univ, State Key Lab Hydraul & Mt River Engn, Chengdu 610065, Peoples R China
基金
中国国家自然科学基金;
关键词
Deep dense shale; Fracture mechanics; Crack initiation; Fracture trajectory; HYDRAULIC FRACTURE; COMPRESSIVE STRENGTH; GRAIN-SIZE; TOUGHNESS; ROCK; PROPAGATION; PARAMETERS; RESISTANCE; ANISOTROPY; BASIN;
D O I
10.1016/j.engfracmech.2024.110039
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The mechanical behavior of shale fractures significantly affects the structure and stability of hydraulic fracturing networks in shale gas reservoirs. Currently, there is insufficient research on the mechanical characteristics of fractures, crack initiation, and the prediction of fracture trajectories in deep dense shale. This study involved conducting direct tension, shear, and threepoint bending fracture mechanical experiments on shale samples, complemented by numerical calculations and mechanistic analyses. The results show a significant influence of the bedding plane angle ( gamma ) on the initiation properties and locations of shale fractures. With gamma ranging from 0 degrees to 90 degrees , shale fractures transition from alignment with the bedding plane to penetration through it. Fracture initiation locations show a significant degree of randomness when fractures propagate along the bedding plane. The horizontal tensile stress changes with increasing gamma , initially increasing and then decreasing as it moves away from the center. The evolution of the horizontal tensile stress field primarily causes alterations in shale fracture paths, reaching its peak value at gamma = 45 degrees . Shale initiation fractures can be classified into four types: tensile fractures through the bedding plane, tensile fractures along the bedding plane, shear fractures across the bedding plane, and shear fractures along the bedding plane. Established a criterion called the " maximum stress strength ratio " to determine fracture initiation, which can predict the initiation properties, locations, and paths of shale fractures. When gamma is small, fractures mainly propagate along the bedding plane, with a higher likelihood of initiation occurring at the center of the specimen. Conversely, when gamma is large, fractures mainly propagate through the bedding plane. The spacing of the bedding planes minimally affects the predicted fracture paths of shale. This study is of significant theoretical importance for reservoir stimulation and stability assessment in deep dense shale gas reservoirs.
引用
收藏
页数:20
相关论文
共 50 条
  • [41] Review on fracture and crack propagation in weldments - A fracture mechanics perspective
    Zerbst, U.
    Ainsworth, R. A.
    Beier, H. Th.
    Pisarski, H.
    Zhang, Z. L.
    Nikbin, K.
    Nitschke-Pagel, T.
    Muenstermann, S.
    Kucharczyk, P.
    Klingbeil, D.
    ENGINEERING FRACTURE MECHANICS, 2014, 132 : 200 - 276
  • [42] Linear Elastic Fracture Mechanics Characterization of an Anisotropic Shale
    Luo, Y.
    Xie, H. P.
    Ren, L.
    Zhang, R.
    Li, C. B.
    Gao, C.
    SCIENTIFIC REPORTS, 2018, 8
  • [43] Mathematical formulation of HMA crack initiation and crack propagation models based on continuum fracture-mechanics and work-potential theory
    Walubita, Lubinda F.
    Simate, Geoffrey S.
    Ofori-Abebresse, Edward
    Martin, Amy Epps
    Lytton, Robert L.
    Sanabria, Luis E.
    INTERNATIONAL JOURNAL OF FATIGUE, 2012, 40 : 112 - 119
  • [44] Fracture mechanics criterion of time-dependent crack initiation from interface free-edge in adhesively bonded butt joints
    Takahashi, Yoshimasa
    Inoue, Kosuke
    Takuma, Masanori
    Saitoh, Ken-ichi
    Sato, Tomohiro
    ENGINEERING FRACTURE MECHANICS, 2017, 186 : 368 - 377
  • [45] Effects of temperature on fracture and damage characteristics of deep granite
    Hou, Chenglu
    Wu, Yeqiu
    Pu, Chao
    Wang, Hongbo
    Cheng, Yugang
    Wu, Yang
    Hao, Xiaotian
    Long, Kun
    PHYSICS OF FLUIDS, 2024, 36 (07)
  • [46] A comparative study of oriented perforating and fracture initiation in seven shale gas plays
    Michael, Andreas
    Gupta, Ipsita
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2021, 88
  • [47] Experimental investigation on the anisotropy of mode-I fracture and tensile failure of layered shale
    Ma, Tianshou
    Wang, Haonan
    Liu, Yang
    Fu, Chenliang
    Ranjith, P. G.
    ENGINEERING FRACTURE MECHANICS, 2023, 290
  • [48] Fracture criteria and initiation mechanism of concrete based on material configurational mechanics
    Wang, Chao
    Feng, Jili
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (06) : 2044 - 2067
  • [49] The investigation on shale mechanical characteristics and brittleness evaluation
    Lei, Wei
    Liu, Xiangjun
    Ding, Yi
    Xiong, Jian
    Liang, Lixi
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [50] The effect of crack-tip constraint in some problems of fracture mechanics
    Matvienko, Yu. G.
    ENGINEERING FAILURE ANALYSIS, 2020, 110 (110)