Investigation on the fracture mechanics characteristics and crack initiation of deep dense shale

被引:7
|
作者
Xiao, Ming -Li [1 ,2 ]
Xie, Hong-Qiang [1 ,2 ]
Feng, Gan [1 ,2 ]
He, Qiang [1 ,2 ]
Liu, Huai-Zhong [1 ,2 ]
Zhuo, Li [1 ,2 ]
机构
[1] Sichuan Univ, Coll Water Resource & Hydropower, Chengdu 610065, Peoples R China
[2] Sichuan Univ, State Key Lab Hydraul & Mt River Engn, Chengdu 610065, Peoples R China
基金
中国国家自然科学基金;
关键词
Deep dense shale; Fracture mechanics; Crack initiation; Fracture trajectory; HYDRAULIC FRACTURE; COMPRESSIVE STRENGTH; GRAIN-SIZE; TOUGHNESS; ROCK; PROPAGATION; PARAMETERS; RESISTANCE; ANISOTROPY; BASIN;
D O I
10.1016/j.engfracmech.2024.110039
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The mechanical behavior of shale fractures significantly affects the structure and stability of hydraulic fracturing networks in shale gas reservoirs. Currently, there is insufficient research on the mechanical characteristics of fractures, crack initiation, and the prediction of fracture trajectories in deep dense shale. This study involved conducting direct tension, shear, and threepoint bending fracture mechanical experiments on shale samples, complemented by numerical calculations and mechanistic analyses. The results show a significant influence of the bedding plane angle ( gamma ) on the initiation properties and locations of shale fractures. With gamma ranging from 0 degrees to 90 degrees , shale fractures transition from alignment with the bedding plane to penetration through it. Fracture initiation locations show a significant degree of randomness when fractures propagate along the bedding plane. The horizontal tensile stress changes with increasing gamma , initially increasing and then decreasing as it moves away from the center. The evolution of the horizontal tensile stress field primarily causes alterations in shale fracture paths, reaching its peak value at gamma = 45 degrees . Shale initiation fractures can be classified into four types: tensile fractures through the bedding plane, tensile fractures along the bedding plane, shear fractures across the bedding plane, and shear fractures along the bedding plane. Established a criterion called the " maximum stress strength ratio " to determine fracture initiation, which can predict the initiation properties, locations, and paths of shale fractures. When gamma is small, fractures mainly propagate along the bedding plane, with a higher likelihood of initiation occurring at the center of the specimen. Conversely, when gamma is large, fractures mainly propagate through the bedding plane. The spacing of the bedding planes minimally affects the predicted fracture paths of shale. This study is of significant theoretical importance for reservoir stimulation and stability assessment in deep dense shale gas reservoirs.
引用
收藏
页数:20
相关论文
共 50 条
  • [31] Fracture mechanics analysis of cast duplex stainless steel elbows containing a surface crack
    Le Delliou, PA
    Sémété, P
    Ignaccolo, S
    EFFECTS OF PRODUCT QUALITY AND DESIGN CRITERIA ON STRUCTURAL INTEGRITY, 1998, 1337 : 159 - 171
  • [32] Shear mechanism of fracture initiation from a horizontal well in layered shale
    Heng, Shuai
    Zhao, Ruitian
    Li, Xianzhong
    Guo, Yingying
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2021, 88
  • [33] Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach
    Wang, Wei
    Zhao, Peng
    Liao, Yisha
    Zhang, Yuelei
    Peng, Jiao
    Xian, Hongyu
    Liu, Jun
    FRONTIERS IN ENERGY RESEARCH, 2023, 11
  • [34] Experimental Investigation of Crack Extension Patterns in Hydraulic Fracturing with Shale, Sandstone and Granite Cores
    He, Jianming
    Lin, Chong
    Li, Xiao
    Wan, Xiaole
    ENERGIES, 2016, 9 (12)
  • [35] Influence of strain measurement methods on crack initiation and crack damage thresholds of shale
    Xu, Rongchao
    Gao, Liang
    Jin, Yiding
    Wang, Yibo
    Li, Zhen
    Hu, Shanchao
    GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES, 2025, 11 (01)
  • [36] Numerical Investigation on the Hydraulic Fracture Evolution of Jointed Shale
    Men, Xiaoxi
    Jin, Jiaxu
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [37] Prospects of Application of Brittle Fracture Mechanics Criteria in Evaluating the Probability of Crystallization Crack Initiation in Welding.
    Makhnenko, V.I.
    Sterenbogen, Yu.A.
    Pivtorak, N.I.
    Avtomaticheskaya Svarka, 1979, (11):
  • [38] Fracture mechanics investigation of crack coalescence in a steel tubular T-joint specimen
    Tanaka, Satoyuki
    Htut, Thin Thin
    Maeda, Kengo
    Yagi, Kazuhisa
    Osawa, Naoki
    ENGINEERING FAILURE ANALYSIS, 2022, 139
  • [39] Fracture mechanics analysis of pre-stressed concrete sleepers via investigating crack initiation length
    Rezaie, F.
    Farnam, S. M.
    ENGINEERING FAILURE ANALYSIS, 2015, 58 : 267 - 280
  • [40] Method of understanding for investigation of crack propagation trajectory and fracture aspects in dental cracks on view of fracture mechanics theories
    El-Sheikhy, Refat
    Al-Khuraif, Abdulaziz
    SCIENTIFIC REPORTS, 2024, 14 (01):