Magnesium based implants: Alloying and coating strategies for improvement in its biomechanical and biocorrosion properties

被引:0
|
作者
Mishra, Triloki Nath [1 ]
Kumar, Amaresh [1 ]
Prasad, Shashi Bhushan [1 ]
机构
[1] Natl Inst Technol, Dept Prod & Ind Engn, Jamshedpur 831014, India
关键词
Magnesium; implants; biodegradability; biomechanical; biocorrosion; alloying; coating; PLASMA ELECTROLYTIC OXIDATION; MG-SR ALLOYS; CORROSION BEHAVIOR; MECHANICAL-PROPERTIES; IN-VITRO; CALCIUM POLYPHOSPHATE; MATRIX COMPOSITES; GRAIN-REFINEMENT; CA ALLOYS; BIOCOMPATIBILITY BEHAVIOR;
D O I
10.1177/14644207241269609
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Magnesium (Mg) based materials show great promise as temporary implant applications owing to their biocompatibility and biodegradability. These characteristics remove the risk of subsequent surgery to extract the implant once the process of bone tissue healing is finished. Additionally, its density and elastic modulus are near to those of natural bone, thereby reducing the stress-shielding effect. Mg is mostly recognized for its osteoconductive abilities, which implies that it encourages the generation of fresh bone tissue. It also has antimicrobial properties, which lower the possibility of infections leading to implant failure. Moreover, the rapid bio-corrosion of pure Mg in the presence of physiological fluids is a serious concern. The implant's mechanical integrity deteriorates as a result of this corrosion before the surrounding tissue has completely recovered. To address these issues, this review focused on approaches, including alloying, the creation of composites, and surface coating, which can increase their biomechanical and bio-corrosion properties. In vitro analysis of biomechanical and bio-corrosion characteristics of newly manufactured Mg-based implant material is presented in this article. In addition to this application, a list of approved devices made from Mg-based material is highlighted. Furthermore, the present challenges and prospects for future research are also discussed.
引用
收藏
页码:428 / 458
页数:31
相关论文
共 50 条
  • [21] Tailoring magnesium-doped coatings for improving surface and biological properties of titanium-based dental implants
    Dini, Caroline
    Yamashita, Karen Midori
    Sacramento, Catharina Marques
    Borges, Maria Helena Rossy
    Takeda, Thais Terumi Sadamitsu
    Silva, Joao Pedro dos Santos
    Nagay, Bruna Egumi
    Costa, Raphael Cavalcante
    da Cruz, Nilson Cristino
    Rangel, Elidiane Cipriano
    Ruiz, Karina Gonzalez Silverio
    Barao, Valentim A. R.
    COLLOIDS AND SURFACES B-BIOINTERFACES, 2025, 246
  • [22] Coating on Magnesium Alloy with Super Duralumin by Hot Extrusion and Evaluation of Its Surface Properties
    Tokunaga, Toko
    Sotomoto, Kazushi
    Ohno, Munekazu
    Matsuura, Kiyotaka
    MATERIALS TRANSACTIONS, 2018, 59 (03) : 432 - 436
  • [23] Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications
    Badkoobeh, Farzad
    Mostaan, Hossein
    Rafiei, Mahdi
    Bakhsheshi-Rad, Hamid Reza
    RamaKrishna, Seeram
    Chen, Xiongbiao
    JOURNAL OF MAGNESIUM AND ALLOYS, 2023, 11 (03) : 801 - 839
  • [24] Coating on Magnesium Alloy with Super Duralumin by Hot Extrusion and Evaluation of Its Surface Properties
    Tokunaga, Toko
    Sotomoto, Kazushi
    Ohno, Munekazu
    Matsuura, Kiyotaka
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2017, 81 (08) : 389 - 393
  • [25] The Biocompatibility and Antibacterial Properties of the CNTs-Doped Magnesium Based Composite Implants in a Long-Term Biodegradation Process
    Zhao, Meng
    Su, Rongjun
    Ji, Lingyu
    Zhang, Ying
    Wu, Huirong
    Wen, Zhaohui
    Dai, Changsong
    JOURNAL OF NANOMATERIALS, 2023, 2023
  • [26] Effect of Mn alloying on the microstructure and micro-shear properties of laser direct energy deposition Stellite21 cobalt-based coating and its process research
    Zhao, Yongsheng
    Wu, Ying
    Liu, Yan
    Zhang, Zhenlin
    Che, Xiaoli
    Chen, Hui
    SURFACE & COATINGS TECHNOLOGY, 2024, 483
  • [27] A metasilicate-based ceramic coating formed on magnesium alloy by microarc oxidation and its corrosion in simulated body fluid
    Wang, Y. M.
    Guo, J. W.
    Shao, Z. K.
    Zhuang, J. P.
    Jin, M. S.
    Wu, C. J.
    Wei, D. Q.
    Zhou, Y.
    SURFACE & COATINGS TECHNOLOGY, 2013, 219 : 8 - 14
  • [28] Improvement in energy release properties of boron-based propellant by oxidant coating
    Liang, Daolun
    Liu, Jianzhong
    Chen, Binghong
    Zhou, Junhu
    Cen, Kefa
    THERMOCHIMICA ACTA, 2016, 638 : 58 - 68
  • [29] Effect of Laser Remelting of Fe-Based Thermally Sprayed Coating on AZ91 Magnesium Alloy on Its Structural and Tribological Properties
    Buchtik, Martin
    Brezina, Matej
    Mrna, Libor
    Palan, Marek
    Filipensky, Jan
    Dolezal, Pavel
    Necas, David
    Fryza, Josef
    Kajanek, Daniel
    Wasserbauer, Jaromir
    Doskocil, Leos
    COATINGS, 2023, 13 (06)
  • [30] Tartaric acid, an effective additive to improve the surface properties and bio-corrosion resistance of HA-coated magnesium-based implants
    Korrani, A. Mardani
    Zargarian, Sh.
    Mohammadloo, H. Eivaz
    Asemabadi, Z.
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2025, 296