Optimization and kinetic analysis of electrocoagulation-assisted adsorption for treatment of young landfill leachate

An investigation was conducted on the electrocoagulation treatment of high-strength young landfill leachate using an electrode made of aluminium in a batch electrochemical cell reactor. An iron sheet of 1 mx1 mx1.1 m (L: B: H) was used to construct the two landfill simulating reactors, both the reactors were operated at different conditions, i.e., one without rainfall (S-1) and the other with rainfall (S-2). Both reactors have 51% wet and 49% dry waste, which is the typical waste composition of India, and the quantity of waste taken was 450 kg; hence, the generated leachate was treated. This work focuses on the utilization of electrocoagulation as the sole treatment method where coagulation and adsorption occur simultaneously for young landfill leachate. The study employed a central composite design (CCD) to systematically vary the initial pH, current density (CD), and reaction time to examine their impact on the removal efficiency of COD (Chemical oxygen demand), TOC (Total organic carbon), and TSS (Total Suspended Solids). The optimum conditions obtained were a pH of 7.35, a CD of 15.29 mA/cm(2), and a reaction duration of 57 min. When the conditions were optimized, the COD, TSS, and TOC removal efficiencies were 83.56%, 73.12%, and 85.58%, respectively. Also, the electrodes depleted 2.78 g of Al/L. In addition, pseudo-first-order and pseudo-second-order kinetics were employed to examine the elimination of contaminants by adsorption on aluminium hydroxide, thereby confirming the adsorption process. After investigation through energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD), with the produced sludge confirmed that electrocoagulation removed a significant amount of metals from landfill leachate.