Numerical and Experimental Analyses of the Effect of Water Injection on Combustion of Mg-Based Hydroreactive Fuels

The energy release process of the Mg-based hydroreactive fuels directly affects the performance of water ramjet engines, and the burning rate is one of the key parameters of the Mg-based hydroreactive fuels. However, there is not enough in-depth understanding of the combustion process of Mg-based hydroreactive fuels within the chamber of water ramjet engines, and there is a lack of effective means of prediction of the burning rate. Therefore, this paper aims to examine the flame structure of Mg-based hydroreactive fuels with a high metal content and analyze the impact of the water injection velocity and droplet diameter on the combustion property. A combustion experiment system was designed to replicate the combustion of Mg-based hydroreactive fuels within water ramjet engines, and the average linear burning rate was calculated through the target line method. On the basis of the experiment, a combustion-flow coupling solution model of Mg-based hydroreactive fuels was formulated, including the reaction mechanism between Mg/H2O and the decomposition products from an oxidizer and binder. The model was validated through experimental results with Mg-based hydroreactive fuels at various pressures and water injection velocities. The mean absolute percentage error (MAPE) in the experimental results was less than 5%, proving the accuracy and validity of the model. The resulting model was employed for simulating the combustion of Mg-based hydroreactive fuels under different water injection parameters. The addition of water injection resulted in the creation of a new high-temperature region, namely the Mg/H2O non-premixed combustion region in addition to improving the radial diffusion of the flame. With the increasing water injection velocity, the characteristic distance of Mg/H2O non-premixed combustion region is decreased, which enhances the heat transfer to burning surface and accelerates the fuel combustion. The impact of droplet parameters was investigated, revealing that larger droplets enhance the penetration of the fuel-rich gas, which is similar to the effect of injection velocity. However, when the droplet size becomes too large, the aqueous droplets do not fully evaporate, resulting in a slight decrease in the burning rate. These findings enhance the understanding of the mechanisms behind the burning rate variation in Mg-based hydroreactive fuels and offer theoretical guidance for the optimal selection of the engine operating parameters.