Effects of Loom Speed, Insertion Air Pressure, and Yarn Type on Fabric Air Permeability: Case Study on Air Jet Loom

被引：1
|
作者：
Admas, Anmen [1 ]
Assefa, Alemayehu [1 ]
机构：
[1] Bahir Dar Univ, Ethiopian Inst Text & Fash Technol, POB 1037, Bahir Dar, Ethiopia
来源：
JOURNAL OF ENGINEERING | 2024年 / 2024卷
关键词：
OPEN-END; THERMAL COMFORT; WEFT YARN; WOVEN; PARAMETERS; RING; COTTON;
D O I：
10.1155/2024/2660559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The air permeability of the fabric is affected by the type of yarn used, the loom speed, and the amount of air pressure delivered by the relay nozzles. In this study, 21 Ne of ring and rotor spun yarns were used as a weft in an air jet loom. Loom speed and left- and right-side relay nozzles pressure in a range of 400-600 RPM, 2-4 bar, and 3-6.5 bar, respectively, were taken as additional factors. To develop and analyze the experiment, a full factorial design was used. It was observed that the air permeability of rotor spun weft yarn fabric's is greater than ring spun weft yarn fabrics. Furthermore, when the speed of the loom increased and the left- and right-side relay nozzles air pressure decreased, the fabric's air permeability increased and vice versa.
引用
收藏
页数：10
相关论文
共 50 条
  • [1] Effect of Cotton/Polyester Blend Ratio, Loom Speed, and Air Pressure on Yarn Twist Loss and Yarn Strength Loss: The Case of Air-Jet Loom
    Ketema, Mulatu Yitna
    Ayele, Million
    JOURNAL OF NATURAL FIBERS, 2023, 20 (01)
  • [2] Efficiency of an accelerating apparatus for weft yarn insertion of air jet loom
    Masuda, Atsuji
    Sogi, Yoshimasa
    Ogata, Nobuo
    Journal of the Textile Machinery Society of Japan, 1999, 52 (01): : 73 - 81
  • [3] Investigation into The Fabric Handle which Weaved on Air-jet Loom by bundle yarn filling Insertion technology
    Weng, Yi
    Cui, Hongjun
    ADVANCES IN TEXTILE ENGINEERING AND MATERIALS III, PTS 1 AND 2, 2013, 821-822 : 360 - 364
  • [4] Weft-insertion speed of polyester textured yarns in air jet loom
    Industr. Res. Institute of Ishikawa, Ro-1 Tomizu-Machi, Kanazawa 920-0223, Japan
    Seni Kikai Gakkai Shi/Journal of the Textile Machinery Society of Japan, 2002, 55 (08) : 31 - 39
  • [5] Experimental investigation on air-jet loom sub-nozzles for weft yarn insertion
    Belforte, G.
    Mattiazzo, G.
    Testore, F.
    Visconte, C.
    TEXTILE RESEARCH JOURNAL, 2011, 81 (08) : 791 - 797
  • [6] Investigation on overcoming weft detwisting air-insertion of air-jet loom
    China Textile Univ, Shanghai, China
    J China Text Univ Engl Ed, 2 (72-76):
  • [7] Simulation of air flow-yarn interaction inside the main nozzle of an air jet loom
    Osman, Akil
    Malengier, Benny
    De Meulemeester, Simon
    Peeters, Jozef
    Vierendeels, Jan
    Degroote, Joris
    TEXTILE RESEARCH JOURNAL, 2018, 88 (10) : 1173 - 1183
  • [8] Optimization of air pressure and speed of air jet loom; impact on fabric tensile and tear strength properties using Response Surface Methodology
    Zegan, Mihret
    Ayele, Million
    JOURNAL OF NATURAL FIBERS, 2022, 19 (15) : 10227 - 10240
  • [9] Dependences of Polypropylene Fabric Air Permeability and Flammability on the Yarn Structure and Air Pressure in a Texturing Jet
    Abromavicius, Raimundas
    Milasius, Rimvydas
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2010, 16 (02): : 129 - 132
  • [10] A Study of the Gas Flow through Air Jet Loom
    Heuy-Dong Kim
    Chae-Min Lim
    Ho-Joon Lee
    Doo-Hwan Chun
    Journal of Thermal Science, 2007, (02) : 159 - 163
12345