Evaluation of nano indentation behavior of TIG, MIG and diffusion bonded Inconel 718 and austenitic Stainless Steel 316L joint interface

被引：7

作者：

Khan, Salman ^{[1
]}

Khadija ^{[2
]}

Junaid, Massab ^{[1
]}

Shehbaz, Tauheed ^{[3
]}

Khan, Fahd Nawaz ^{[3
]}

Naveed, Nida ^{[4
]}

机构：

[1] Ghulam Ishaq Khan Inst Engn Sci & Technol, Fac Mech Engn, Swabi, Pakistan

[2] Abdul Wali Khan Univ Mardan AWKUM, Dept Phys, Mardan, Pakistan

[3] Ghulam Ishaq Khan Inst Engn Sci & Technol, Fac Mat & Chem Engn, Swabi, Pakistan

[4] Univ Sunderland, Sch Engn, St Peters Campus, Sunderland SR6 0DD, England

来源：

MATERIALS LETTERS | 2024年 / 371卷

关键词：

Nanomechanical properties; X-ray diffraction; Diffusion bonding; Phase transformation; Inconel; 718; MECHANICAL-PROPERTIES; MICROSTRUCTURE; PRESSURE; PHASE; ZONE;

D O I：

10.1016/j.matlet.2024.136952

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The nanomechanical characteristics of Metal Inert Gas (MIG), Tungsten Inert Gas (TIG), and diffusion-bonded Inconel (IN718) and Austenitic Stainless Steel (SS 316L) were investigated. The nano hardness and elastic modulus of different weldments were evaluated using nanoindentation and compared. The results showed that intermetallic compounds (IMCs) and carbides were reduced with diffusion bonding. Moreover, maximum nano hardness and elastic modulus occurred in the welded zone (WZ) of TIG and MIG welded joints while at the bonding interface in diffusion bonding (DB). Lastly, the nano hardness of the bonding interface in diffusionbonded was 11 % and 7 % lower compared to MIG and TIG welded joints.

引用

页数：4

共 21 条

[1] Influence of pulsed Nd:YAG laser welding power on the microstructures and nano creep behaviour of Ti5Al2.5Sn beads [J].

Asif, Huzaifa ;

Khan, Fahd Nawaz ;

Shehbaz, Tauheed ;

Junaid, Massab ;

Baig, Mirza Nadeem .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023, 237 (05) :1159-1171

[2] On microstructure and strength properties of microwave welded Inconel 718/ stainless steel (SS-316L) [J].

Bansal, Amit ;

Sharma, Apurbba Kumar ;

Das, Shantanu ;

Kumar, Pradeep .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2016, 230 (05) :939-948

[3] Nanoindentation investigation on the creep behavior of P92 steel weld joint after creep-fatigue loading [J].

Gao, Zengliang ;

Song, Yuxuan ;

Pan, Zhouxin ;

Chen, Jianan ;

Ma, Yi .

INTERNATIONAL JOURNAL OF FATIGUE, 2020, 134

[4] Effect of pressure, temperature and homogenization on the dissolution behavior and mechanical properties of IN718/AISI 304 during transient liquid phase bonding [J].

Ghaderi, Sina ;

Karimzadeh, Fathallah ;

Ashrafi, Ali ;

Hosseini, Seyed Hamed .

JOURNAL OF MANUFACTURING PROCESSES, 2020, 60 :213-226

[5] Microstructural and weldability analysis of Inconel617/AISI 310 stainless steel dissimilar welds [J].

Hosseini, H. Shah ;

Shamanian, M. ;

Kermanpur, A. .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2016, 144 :18-24

[6]

Khan Salman, 2024, Advanced Materials Research, V1179, P147, DOI 10.4028/p-k8wUUO

[7] Influence of Cu interlayer on the interfacial strengthening of the diffusion-bonded SS-304L/IN718 [J].

Khan, Salman ;

Junaid, Massab ;

Shehbaz, Tauheed ;

Khan, Fahd Nawaz .

MATERIALS LETTERS, 2024, 358

[8]

Kim J.J., 2015, About us, DOI [10.1016/j.ijmecsci.2015.09.015, DOI 10.1016/J.IJMECSCI.2015.09.015]

[9]

Kumar P., 2023, Sustain., V15

[10] Microstructure and mechanical properties of Ti-22Al-25Nb/TA15 dissimilar joint fabricated by dual-beam laser welding [J].

Li, Junjie ;

Shen, Junqi ;

Hu, Shengsun ;

Zhang, Hao ;

Bu, Xianzheng .

OPTICS AND LASER TECHNOLOGY, 2019, 109 :123-130

← 1 2 3 →