Modeling of Processes in the Combustion Chamber of a Hybrid Solid-Fuel Engine

被引：1

作者：

Stamov, L. I. ^{[1
,2
]}

Tyurenkova, V. V. ^{[1
,2
]}

Mikhalchenko, E. V. ^{[1
,2
]}

Chen, F. ^{[3
]}

Meng, Yu. ^{[3
]}

机构：

[1] Russian Acad Sci, Natl Res Ctr Kurchatov Inst, Sci Res Inst Syst Anal, Moscow, Russia

[2] Lomonosov Moscow State Univ, Fac Mech & Math, Chair Wave & Gas Dynam, Moscow, Russia

[3] Shanghai Jiao Tong Univ, Sch Aeronaut & Astronaut, Shanghai, Peoples R China

来源：

MOSCOW UNIVERSITY MECHANICS BULLETIN | 2024年 / 79卷 / 03期

关键词：

hybrid engines; solid fuel; numerical simulation; combustion; regression rate;

D O I：

10.3103/S0027133024700134

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents the results of three-dimensional computational modeling of processes in the combustion chamber of a hybrid solid-fuel engine. Polymethylmethacrylate was used as a solid fuel, and air was used as an oxidizer. In the model used, the heated oxidizer in gaseous form was fed into the combustion chamber at supersonic speed. As a result of the interaction of the oxidizer with the surface of the solid fuel, it begins to warm up and decompose with the release of flammable gases. The geometry of the combustion chamber and solid fuel was based on experimental work. The results of a series of calculations for various geometries of the combustion chamber were presented. The distribution of physical parameters corresponding to the diffusion mode of combustion was obtained.

引用

页码：97 / 101

页数：5

共 50 条

[21] Combustion of solid fuel in a hybrid porous reactor
Jovicic, Vojislav
Fedorova, Nataliia
Zbogar-Rasic, Ana
Nloka, Daniel
Reichert, Fernando
Delgado, Antonio
INFUB - 11TH EUROPEAN CONFERENCE ON INDUSTRIAL FURNACES AND BOILERS (INFUB-11), 2017, 120 : 431 - 438
[22] Restitution methodology for space and time dependent solid-fuel port diameter evolution in hybrid rocket engines
Durand, Jean-Etienne
Lestrade, Jean-Yves
Anthoine, Jerome
AEROSPACE SCIENCE AND TECHNOLOGY, 2021, 110
[23] Modeling filtration combustion of a pyrolyzing solid fuel
Salganskii, E. A.
Polianchik, E. V.
Manelis, G. B.
COMBUSTION EXPLOSION AND SHOCK WAVES, 2013, 49 (01) : 38 - 52
[24] Modeling filtration combustion of a pyrolyzing solid fuel
E. A. Salganskii
E. V. Polianchik
G. B. Manelis
Combustion, Explosion, and Shock Waves, 2013, 49 : 38 - 52
[25] INJECTED FUEL BURNING IN A COMBUSTION CHAMBER
Mikhalchenko, E. V.
HEAT TRANSFER RESEARCH, 2023, 54 (04) : 1 - 10
[26] Numerical Investigation of Different Combustion Models for Dual-Fuel Engine Combustion Processes
Liu, Xicai
Wu, Wenfeng
Wang, Fubo
Wang, Zhengquan
Guo, Jia
Yu, Hongliang
CHEMICAL ENGINEERING & TECHNOLOGY, 2024, 47 (04) : 657 - 663
[27] Effect of fuel grain configuration on the thrust of a solid-fuel scramjet
Zhang, Hao
Wang, Ningfei
Wu, Zhiwen
AEROSPACE SCIENCE AND TECHNOLOGY, 2020, 106 (106)
[28] Computational modeling of heat and mass transfer processes in combustion chamber at power plant of Kazakhstan
Leithner, Reinhard
Askarova, Aliya
Bolegenova, Saltanat
Bolegenova, Symbat
Maximov, Valeriy
Ospanova, Shinar
Ergalieva, Aigul
Nugymanova, Aizhan
Beketayeva, Meruyert
20TH INTERNATIONAL CONFERENCE ON CIRCUITS, SYSTEMS, COMMUNICATIONS AND COMPUTERS (CSCC 2016), 2016, 76
[29] Experimental investigation and structural optimization prediction of a novel carbon stripper for solid-fuel chemical looping combustion
Wang, Xiaojia
Gong, Yutong
Shao, Danyang
Chen, Delu
CHEMICAL ENGINEERING JOURNAL, 2023, 470
[30] The instability of the working process in the combustion chamber of a solid-propellant rocket engine
Yu. M. Davydov
M. Yu. Egorov
Doklady Physics, 2001, 46 : 195 - 198

← 1 2 3 4 5 →