Enhancement of the electrostatic-magnetic hybrid thrust performance using a stagnant ring

Electrostatic-magnetic hybrid ion acceleration has been researched to realize high-thrust density and efficient thrust operations. In this study, a newly designed stagnant ring (SR) was installed in an electrostatic-magnetic hybrid thruster with the nominal anode inner radius of 40 mm to improve the thrust performance, and the effects of SR on the thruster operation of xenon propellant were analyzed. During constant-discharge-voltage operations, the discharge current increased with both electrically conductive (copper) and non-conductive (ceramic) SR materials, yet the thrust increased only with the copper SR, which was equipotential to the anode. At lower values of the radial width (H) of the copper SR, the thrust and discharge current were almost dominated by the propellant flow rate from the anode surface. However, the contribution of the propellant flow rate from the cathode tip on the thrust and discharge current became significant when H >= 9 mm. The thrust coefficient in electromagnetic acceleration form exhibited a maximum value at H = 9 mm, whereas that in electrostatic acceleration form monotonically increased when H ranged from 0 to 20 mm. The highest thrust efficiency was obtained at H = 12 mm. The study findings indicate that installing a conductive SR can effectively enhance the thrust performance in electrostatic-magnetic hybrid thrusters.