Boosting interface compatibility of high-voltage LiNi0.5Mn1.5O4 cathode materials with an ionic-conductive Li0.33La0.56TiO3 coating

High voltage LiNi0.5Mn1.5O4 (LNMO) is a crucial cathode material for lithium-ion batteries (LIBs) aiming at high energy densities. However, its performance is hindered by the dissolution of transition metal ions and the instability of the cathode electrolyte interface (CEI) film at elevated voltages. To address these issues, we report a solvothermal method to prepare LNMO coated with Li+-conductor Li0.33La0.56TiO3 (LNMO@LLTO). Our study reveals that the LLTO coating not only enhances ion diffusion at the interface, minimizing the Li+ concentration gradient, and acts as a barrier against Mn-ion dissolution. This coating minimizes side reactions, mitigates structural degradation, and promotes the formation of a stable and balanced CEI film that incorporates LLTO, thus ensuring the long-term cycle stability. When compared to bulk LNMO, the LNMO@LLTO cathode demonstrates superior performance, maintaining reversible capacities of 111.4 and 102.2 mAh center dot g- 1 after 500 cycles at 2 and 5C at 25 degrees C, respectively. Even at 60 degrees C, the LNMO@LLTO maintains a high capacity of 94.3 mAh center dot g- 1 with minimal electrochemical polarization after 200 cycles at 2C. This simple preparation technique, together with its performance promotion, offers new insights into the development of high voltage cathode materials for high energy density LIBs.