Clearances Assessment in the Volkswagen Crafter Chassis by Means of the 3D Scan

被引:0
|
作者
Mura, Francesco Dalle [1 ]
Puggelli, Luca [1 ]
Furferi, Rocco [1 ]
Governi, Lapo [1 ]
机构
[1] Univ Florence, Dept Ind Engn, Via Santa Marta 3, I-50139 Florence, Italy
来源
DESIGN TOOLS AND METHODS IN INDUSTRIAL ENGINEERING III, VOL 2, ADM 2023 | 2024年
关键词
Tolerance Stack-ups; 3D scanning; CAD model; Reverse Engineering; Deviation Analysis; TOLERANCE ANALYSIS;
D O I
10.1007/978-3-031-58094-9_46
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In mechanical design, tolerance stack-up has a fundamental role to ensure mechanical coupling among assembly components. To avoid interferences, gaps between connected parts are introduced since the design phase, to compensate for possible dimensional variations. The present study aims to assess clearances in the Volkswagen Crafter chassis, by comparing the CAD model to the 3D reconstruction of the real van, obtained by means of 3D scanning. This activity has been carried out within SMART AMBULANCE project (POR FESR Toscana call), which has as its goal the realization of an advanced ambulance by implying smart technologies. Clearance analysis was performed before proceeding with the design of the interior setup of the ambulance medical compartment, since even small deviations may compromise the assembly of the covering panels. The analysis was useful not only to evaluate deviations between ideal and real geometry, but also to identify the locations of the gaps.
引用
收藏
页码:418 / 426
页数:9
相关论文
共 50 条
  • [1] From scan to print: 3D printing as a means for replication
    HP Labs Bristol, United Kingdom
    不详
    不详
    HP Lab Tech Rep, 30
  • [2] 3D from scan to print
    3D von Scan bis Druck
    1600, Springer-VDI Verlag GmbH and Co. KG (66): : 11 - 12
  • [3] Fast Scan Context Matching for Omnidirectional 3D Scan
    Kihara, Hikaru
    Kumon, Makoto
    Nakatsuma, Kei
    Furukawa, Tomonari
    2022 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2022, : 925 - 930
  • [4] A new triple-scan protocol for 3D fit assessment of dental restorations
    Holst, Stefan
    Karl, Matthias
    Wichmann, Manfred
    Matta, Ragai-Edward T.
    QUINTESSENCE INTERNATIONAL, 2011, 42 (08): : 651 - 657
  • [5] Development of assessment criteria for elderly lateral torso deformity for 3D scan anthropometry
    Han, Hyunsook
    Park, Sunmi
    INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY, 2024, 36 (05) : 924 - 937
  • [6] Uncertainty Estimation for Assessment of 3D US Scan Adequacy and DDH Metric Reliability
    Kannan, Arunkumar
    Hodgson, Antony
    Mulpuri, Kishore
    Garbi, Rafeef
    UNCERTAINTY FOR SAFE UTILIZATION OF MACHINE LEARNING IN MEDICAL IMAGING, AND GRAPHS IN BIOMEDICAL IMAGE ANALYSIS, UNSURE 2020, GRAIL 2020, 2020, 12443 : 97 - 105
  • [7] A comprehensive model for 3D revolute joints with clearances in mechanical systems
    Yan, Shaoze
    Xiang, Wuweikai
    Zhang, Lin
    NONLINEAR DYNAMICS, 2015, 80 (1-2) : 309 - 328
  • [8] Removing the overlap of 3D scan data
    Chung, Yun Chan
    Chang, Minho
    2007 INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS, VOLS 1-6, 2007, : 1666 - +
  • [9] A comprehensive model for 3D revolute joints with clearances in mechanical systems
    Shaoze Yan
    Wuweikai Xiang
    Lin Zhang
    Nonlinear Dynamics, 2015, 80 : 309 - 328
  • [10] Qualify assessment for extrusion-based additive manufacturing with 3D scan and machine learning
    Li, Xiaoyu
    Zhang, Mengna
    Zhou, Mingxia
    Wang, Jing
    Zhu, Weixin
    Wu, Chuan
    Zhang, Xiao
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 90 : 274 - 285