Regression-based prediction of flow-induced dominant vibrational frequencies in two-phase flow regimes

被引:2
作者
Sohail, Muhammad [1 ]
Pao, William [1 ]
Othman, Abdul Rahim [1 ]
Azam, Huzaifa [1 ]
Khan, Muhammad Rehan [2 ]
机构
[1] Univ Teknol PETRONAS, Mech Engn Dept, Perak Darul Ridzuan 32610, Malaysia
[2] Natl Univ Sci & Technol, Coll Elect & Mech Engn, Islamabad, Pakistan
关键词
Flow induced vibrations; Two-phase flow; Flow regimes; Regression analysis; Dominant vibrational frequency; SIMULATIONS; WAVES;
D O I
10.1016/j.oceaneng.2024.118178
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
An extensive spectrum of vibrational frequencies exists in two-phase Flow Induced Vibrations (FIVs) due to the presence of diverse flow patterns. The distinct behavior of flow regimes poses a significant challenge in predicting Dominant Vibrational Frequencies (DVFs) of two-phase FIVs. This research aims to develop correlations for predicting DVFs in Stratified, Slug, Wavy, Annular, Elongated bubble, and Dispersed bubble flow regimes. Numerical and experimental investigation is carried out to observe the DVFs of different flow patterns on a horizontal 90-degree bend. DVFs are extracted from the Fast Fourier Transform (FFT) response of the bend. A third-degree polynomial regression technique is adopted to identify the optimal fitting polynomials of DVFs relative to gas and liquid superficial velocities in each flow regime. This study has successfully developed thirdorder regression polynomials to predict DVFs across diverse two-phase flow regimes for corresponding superficial velocities of gas and liquid. The proposed polynomials for all six flow regimes demonstrated Root Means Squared Error (RMSE) below 2%. Higher R-squared values affirmed the efficacy in elucidating the variance in DVFs. The findings significantly elevate the prediction of DVFs across diverse flow patterns offering a critical advancement in two-phase flow-induced vibrations.
引用
收藏
页数:15
相关论文
共 50 条
[41]   Prediction Model of Two-Phase Flow Distribution in a Vertical Header [J].
Onaka, Yoji ;
Adachi, Rihito ;
Kishida, Nanami ;
Matsumoto, Takashi .
26TH IIR INTERNATIONAL CONGRESS OF REFRIGERATION, VOL 2, 2023, :237-248
[42]   The effect of tube diameter on vertical two-phase flow regimes in small tubes [J].
Chen, L. ;
Tian, Y. S. ;
Karayiannis, T. G. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (21-22) :4220-4230
[43]   Effect of IR Transceiver orientation on gas/liquid two-phase flow regimes [J].
Mithran, N. ;
Venkatesan, M. .
FLOW MEASUREMENT AND INSTRUMENTATION, 2017, 58 :12-20
[44]   CFD and ERT investigations on two-phase flow regimes in vertical and horizontal tubes [J].
Parvareh, A. ;
Rahimi, M. ;
Alizadehdakhel, A. ;
Alsairafi, A. A. .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (03) :304-311
[45]   Tuning of regimes during two-phase flow through a cross-junction [J].
Boruah, Manash Protim ;
Sarker, Anik ;
Randive, Pitambar R. ;
Pati, Sukumar ;
Sahu, Kirti Chandra .
PHYSICS OF FLUIDS, 2021, 33 (12)
[46]   Flow induced vibration of two-phase flow passing through orifices under slug pattern conditions [J].
Bamidele, Olufemi E. ;
Hassan, Marwan ;
Ahmed, Wael H. .
JOURNAL OF FLUIDS AND STRUCTURES, 2021, 101
[47]   Confinement and vapour production rate influences in closed two-phase reflux thermosyphons Part A: Flow regimes [J].
Smith, K. ;
Kempers, R. ;
Robinson, A. J. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 119 :907-921
[48]   Prediction of dryout vapor quality for annular two-phase flow in tubes [J].
Marathe, Sameer S. ;
Webb, Ralph L. .
APPLIED THERMAL ENGINEERING, 2008, 28 (07) :691-698
[49]   Prediction of amount of entrained droplets in vertical annular two-phase flow [J].
Sawant, Pravin ;
Ishii, Mamoru ;
Mori, Michitsugu .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2009, 30 (04) :715-728
[50]   Characterization of two-phase flow regimes using laser-photoresistor transceiver setups [J].
Kannaa S.P.N. ;
Srinivas J. ;
Yaswanth R. ;
Venkatesan M. .
Multiphase Science and Technology, 2019, 31 (04) :345-358